[1] CRANIUM, Version 1.0. Molecular Knowledge Systems, Inc., Bedford, NH. 2007.

[2] FIELDVIEW Reference Manual, Software Release Version 10. Intelligent Light. 2004.

[3] KINetics for Fluent, Version 2.4. Reaction Design, Inc., San Diego, CA. 2009.

[4] VdmTools Programmer Manual, Version 3.2.0. Visual Kinematics, Inc. 2005.

[5] T. Ahmad, S. L. Plee, and J. P. Myers. "Computation of Nitric Oxide and Soot Emissions from Turbulent Diffusion Flames". J. of Engineering for Gas Turbines and Power. 107. 48–53. 1985.

[6] C.O. Alanyalioglu and Y. Özyörük. "Fully Transient Conjugate Analysis of Silica-Phenolic Charring Ablation Coupled with Interior Ballistics". AIAA Propulsion and Energy 2019 Forum. 2019.

[7] F. Alauzet and A. Loseille. "A decade of progress on anisotropic mesh adaptation for computational fluid dynamics". Computer-Aided Design. Volume 72. 13–39. March 2016.

[8] F. Alauzet, A. Loseille, D. Marcum, and T. Michal. "Assessment of anisotropic mesh adaptation for high-lift prediction of the HL-CRM configuration". 23rd AIAA Computational Fluid Dynamics Conference. 1–15. June 2017.

[9] A. A. Amsden, P. J. O’Rourke, and T. D. Butler. "KIVA-2: A Computer Program for Chemically Reactive Flows with Sprays". Technical Report LA-11560-MS, UC-96. Los Alamos National Laboratory, Los Alamos, New Mexico. May 1989.

[10] J. D. Anderson. Hypersonics and High Temperature Gas Dynamics. Second edition. AIAA. 2006.

[11] A. Andreini, R. Da Soghe, B. Facchini, L. Mazzei, S. Colantuoni, and F. Turrini . "Local source based CFD modeling of effusion cooling holes: Validation and application to an actual combustor test case". J. Eng. Gas Turbines Power. 136. 1. 011506. 2014.

[12] S. Asgari, X. Hu, M. Tsuk, and S. Kaushik. "Application of POD plus LTI ROM to Battery Thermal Modeling: SISO Case". SAE International Journal of Commercial Vehicles. 7. 1. 278–285. 2014.

[13] M. J. Assael, J. P. M. Trusler, and T. F. Tsolakis. "Thermophysical Properties of Fluids". Technical report. Imperial College Press, London. 1996.

[14] T. Aumeier and T. Behrendt . "Application of an Aerothermal Model for the Effusion Cooling Systems and Finite Rate Chemistry in Aero-Engine Combustors". Turbulence Heat and Mass Transfer. 8. 2015.

[15] R. H. Aungier. "A Fast, Accurate Real Gas Equation of State for Fluid Dynamic Analysis Applications". Journal of Fluids Engineering. 117. 277–281. 1995.

[16] R. Barrett, M. Berry, T. F. Chan, J. Demmel, J. Donato, J. Dongarra, V. Eijkhout, R. Pozo, C. Romine, and H. Van der Vorst. "Templates for the Solution of Linear Systems: Building Blocks for Iterative Methods". SIAM, 2nd edition. Philadelphia, Pennsylvania. 1994.

[17] A. Bejan. Convection Heat Transfer. John Wiley and Sons, New York. 1984.

[18] J. H. Bell, R. D. Mehta. "Development of a two-stream mixing layer from tripped and untripped boundary layers". SIAM, 2nd edition. AIAA Journal. vol. 28, no.12. 2034-2042. 1990.

[19] D. T. Blackstock. Fundamentals of Physical Acoustics. John Wiley & Sons. 2000.

[20] C. T. Bowman. "Chemistry of Gaseous Pollutant Formation and Destruction”. Fossil Fuel Combustion. W. Bartok and A. F. Sarofim, editors. J. Wiley and Sons, Canada. 1991.

[21] R. N. Bracewell. The Fourier transform and its applications. McGraw Hill. 1986.

[22] W. Brack, B. Heine, F. Birkhold, M. Kruse, O. Deutschmann. "Formation of Urea-Based Deposits in an Exhaust System: Numerical Predictions and Experimental Observations on a Hot Gas Test Bench". Emiss. Control Sci. Technol.. 2. 3. 115–123. 2016.

[23] L.J.S. Bradbury,. "The Structure of a Self-Preserving Plane Jet". Journal of Fluid Mechanics. 23. 31-64. 1965.

[24] W.-P. Breugem. “The Effective Viscosity of a Channel-type Porous Medium”. Phys. of Fluids. 19. 10. 2007.

[25] H. Brinkman. “A Calculation of the Viscous Force Exerted by a Flowing Fluid on a Dense Swarm of Particles”. Applied Scientific Research. A1. 27–34. 1949.

[26] H. Brinkman. “The Viscosity of Concentrated Suspensions and Solutions”. J. Chem. Phys. 20. 4. 571–584. 1952.

[27] R. J. Brooks and A. T. Corey. “Hydraulic properties of porous media”. Hydrology Paper 3. Colorado State University. Fort Collins, Colorado, USA: 1964.

[28] S. J. Brookes and J. B. Moss. "Prediction of Soot and Thermal Radiation in Confined Turbulent Jet Diffusion Flames". Combustion and Flame. 116. 486–503. 1999.

[29] R. Carsel and R. Parrish. “Developing joint probability distributions of soil water retention characteristics”. Water Resources Research. 24. 5. 755–769. 1988.

[30] J. R. Cash and A. H. Karp. "A variable order Runge-Kutta method for initial value problems with rapidly varying right-hand sides". ACM Transactions on Mathematical Software. 16. 201–222. 1990.

[31] T. Cebeci and P. Bradshaw. Momentum Transfer in Boundary Layers. Hemisphere Publishing Corporation, New York. 1977.

[32] P. J. Coelho and M. G. Carvalho. "Modeling of Soot Formation and Oxidation in Turbulent Diffusion Flames". J. of Thermophysics and Heat Transfer. 9(4). 644–652. 1995.

[33] M. F. Cohen and D. P. Greenberg. "The Hemi-Cube: A Radiosity Solution for Complex Environments". Computer Graphics. 19(3). 31–40. 1985.

[34] H. W. Coleman, B. K. Hodge, and R. P. Taylor. "A Re-Evaluation of Schlichting’s Surface Roughness Experiment". Journal of Fluids Engineering. 106. 1984.

[35] E. H. Cuthill and J. McKee. "Reducing Bandwidth of Sparse Symmetric Matrices". In Proc. ACM 24th National Conf. New York. 157–172. 1969.

[36] J. F. Daunenhofer and J. R. Baron. "Grid Adaption for the 2D Euler Equations". Technical Report AIAA-85-0484. American Institute of Aeronautics and Astronautics. 1985.

[37] J. E. Dec. "A Conceptual Model of DI Diesel Combustion Based on Laser Sheet Imaging". SAE Technical Paper 970873. SAE. 1997.

[38] J. Ding and D. Gidaspow. "A Bubbling Fluidization Model Using Kinetic Theory of Granular Flow". AIChE J. 36(4). 523–538. 1990.

[39] D.M. Driver. "Reynolds Shear Stress Measurements in a Separated Boundary Layer Flow". AIAA 22nd Fluid Dynamics, Plasma Dynamics and Laser Conference. AIAA-91-1787. 1991.

[40] Y. Egorov and F. Menter. "Experimental Implementation of the RPI Wall Boiling Model in CFX-5.6". Technical Report. ANSYS/TR-04-10, ANSYS GmbH. 2004.

[41] J. I. Erdos, E. Alzner, W. McNally. "Numerical Solution of Periodic Transonic Flow through a Fan Stage". AIAA Journal. 15. 10. 115. 1977.

[42] S. Ergun. "Fluid Flow through Packed Columns". Chem. Eng. Prog. 48(2). 89–94. 1952.

[43] G. M. Faeth. "Spray Atomization and Combustion". Technical Report 1986-136. AIAA. 1986.

[44] J. E. Ffowcs-Williams and D. L. Hawkings. "Sound Generation by Turbulence and Surfaces in Arbitrary Motion". Proc. Roy. Soc. London. A264. 321–342. 1969.

[45] E. U. Finlayson, D. K. Arasteh, C. Huizenga, M. D. Rubin, and M. S. Reilly. "WINDOW 4.0: Documentation of Calculation Procedures". Technical Report Publication LBL-33943/ TA-309. Lawrence Berkeley Laboratory, Energy and Environmental Division, Berkeley, CA 94720. 1993.

[46] K.–Y. Fung and H. Ju. "Broadband Time-Domain Impedance Models”. AIAA Journal. 39(8). January 2001.

[47] K.–Y. Fung, H. Ju, and B. Tallapragada. "Impedance and Its Time-Domain Extensions”. AIAA Journal. 38(1). 30–38. January 2000.

[48] M. T. van Genuchten. “A closed form equation for predicting the hydraulic conductivity of unsaturated soils”. Soil Science Society of American Journal. 44. 5. 892–898. 1980.

[49] T. Gessner. "Dynamic Mesh Adaption for Supersonic Combustion Waves Modeled with Detailed Reaction Mechanisms". PhD thesis. University of Freiburg, Freiburg, Germany. 2001.

[50] A. Ghobadian and S. A. Vasquez. "A General Purpose Implicit Coupled Algorithm for the Solution of Eulerian Multiphase Transport Equation". International Conference on Multiphase Flow. Leipzig, Germany. 2007.

[51] N. E. Gibbs, W. G. Poole, Jr., and P. K. Stockmeyer. "An algorithm for reducing the bandwidth and profile of a sparse matrix". SIAM J. Numer. Anal. 13. 236–250. 1976.

[52] M. B. Giles. "Non-Reflecting Boundary Conditions for the Euler Equations". Technical Report 88-1. Computational Fluid Dynamics Laboratory, Massachusetts Institute of Technology, Cambridge, MA. 1988.

[53] T. Gokcen. "N2-CH4-Ar chemical kinetic model for simulations of atmospheric entry to Titan.". Journal of Thermophysics and Heat Transfer 21. 1. 9–18. 2007.

[54] R.A. Gore and C.T. Crowe. “Effect of particle size on modulating turbulent intensity”. Int. J. Multiphase Flow. 15. 279–285. 1989.

[55] J. Gottgens, F. Mauss, and N. Peters. "Analytic Approximations of Burning Velocities and Flame Thicknesses of Lean Hydrogen, Methane, Ethylene, Ethane, Acetylene and Propane Flames". In Twenty-Fourth Symposium (Int.) on Combustion, Pittsburgh. 129–135. 1992.

[56] P. M. Gresho, R. L. Lee, and R. L. Sani. "On the Time-Dependent Solution of the Incompressible Navier-Stokes Equations in Two and Three Dimensions". In Recent Advances in Numerical Methods in Fluids. Pineridge Press, Swansea, U. K. 1980.

[57] R.N. Gupta, M.Y. Jerrold, R.A. Thompson, and K.P. Lee.. A review of reaction rates and thermodynamic and transport properties for an 11-species air model for chemical and thermal nonequilibrium calculations to 30000 K.". 1990.

[58] B. Gustavsen and A. Semlyen. "Rational approximation of frequency domain responses by vector fitting". IEEE Transactions on Power Delivery. IEEE. Volume 14, Issue 3. 1052-1061. July, 1999.

[59] W. G. Habashi, J. Dompierre, Y. Bourgault, D. Ait-Ali-Yahia, M. Fortin, and M.-G. Vallet. "Anisotropic mesh adaptation: towards user-independent, mesh-independent and solver-independent CFD. Part I: general principles". Int. J. Numer. Meth. Fluids. Volume 32, Issue 6. 725–744. March 14, 2000.

[60] R. J. Hall, M. D. Smooke, and M. B. Colket. Physical and Chemical Aspects of Combustion. Gordon and Breach. 1997.

[61] L. He and H.D. Li. "Single-Passage Analysis of Unsteady Flows around Vibrating Blades of a Transonic Fan under Inlet Distortion". ASME Journal of Turbomachinery. 124. 2. 285–295. 2002.

[62] R. A. W. M. Henkes and C. J. Hoogendoorn. "Scaling of the Turbulent Natural Convection Flow in a Heated Square Cavity". Trans. of the ASME. 116. 400–408. May 1994.

[63] J. B. Heywood. Internal Combustion Engine Fundamentals. McGraw-Hill, New York, rev. edition. 1988.

[64] C. Hirsch. Numerical Computation of Internal and External Flows: Computational Methods for Inviscid and Viscous Flows, volume 2. John Wiley & Sons, New York. 1984.

[65] J. O. Hirschfelder, C. F. Curtiss, and R. B. Bird. Molecular Theory of Gases and Liquids. John Wiley & Sons, New York. 1954.

[66] K. Hsu and A. Jemcov. "Numerical investigation of detonation in premixed hydrogen-air mixture - assessment of simplified chemical mechanisms". Technical Report AIAA-2000-2478. American Institute of Aeronautics and Astronautics, Fluids 2000 Conference and Exhibit, Denver, CO. June 2000.

[67] Y. Y. Hsu. "On the size range of active nucleation cavities on a heating surface". J. Heat Transfer. 84(3). 207–213. August 1962.

[68] X. Hu et al.. "A transient reduced order model for battery thermal management based on singular value decomposition". 2014 IEEE Energy Conversion Congress and Exposition (ECCE). 3971–3976. 2014.

[69] X. Hu, L. Collins, S. Stanton, and S. Jiang. "A Model Parameter Identification Method for Battery Applications". SAE Technical Paper. 2013–01–1529. 2013.

[70] X. Hu, S. Lin, S. Stanton, and W. Lian . "A Foster Network Thermal Model for HEV/EV Battery Modeling". IEEE Transactions on Industry Applications. 47. 4. 1692–1699. 2011.

[71] G. W. Jackson and D. F. James. "The Permeability of Fibrous Porous Media". Canadian Journal of Chemical Engineering. 64(3). 364–374. June 1986.

[72] A. Jemcov and J. P. Maruszewski. "Shape Optimization Based on Downhill Simplex Optimizer and Free-Form Deformation in General Purpose CFD Code". 17th Annual Conference of CFD Society of Canada. Ottawa, Ontario, Canada. 2009.

[73] C.O. Johnson and A. M. Brandis. "Modeling of nonequilibrium CO Fourth-Positive and CN Violet emission in CO2–N2 gases.". Journal of Quantitative Spectroscopy and Radiative Transfer 149. 303–317. 2014.

[74] P. C. Johnson and R. Jackson. "Frictional-Collisional Constitutive Relations for Granular Materials, with Application to Plane Shearing". J. Fluid Mech. 176. 67–93. 1987.

[75] G. Karypis and V. Kumar. METIS - A Software Package for Partitioning Unstructured Graphs, Partitioning Meshes, and Computing Fill-Reducing Orderings of Sparse Matrices, Version 3.0. Manual. University of Minnesota and Army HPC Research Center. 1997.

[76] G. Karypis and K. Schloegel. PARMETIS - Parallel Graph Partitioning and Sparse Matrix Ordering Library, Version 4.0. Manual. University of Minnesota. 2013.

[77] A. Kaufmann, F. Nicoud, and T. Poinsot. Flow Forcing Techniques for Numerical Simulation of Combustion Instabilities. Combustion and Flame. 131. 371–385. 2002.

[78] R. J. Kee, F. M. Rupley, and J. A. Miller. "SURFACE CHEMKIN: A Software Package for the Analysis of Heterogeneous Chemical Kinetics at a Solid-Surface - Gas-Phase Interface". Technical Report SAND 96-8217. Sandia National Labs. 2000.

[79] R. J. Kee, F. M. Rupley, J. A. Miller, M. E. Coltrin, J. F. Grcar, E. Meeks, H. K. Moffat, A. E. Lutz, G. Dixon-Lewis, M. D. Smooke, J. Warnatz, G. H. Evans, R. S. Larson, R. E. Mitchell, L. R. Petzold, W. C. Reynolds, M. Caracotsios, W. E. Stewart, P. Glarborg, C. Wang, O. Adigun, W. G. Houf, C. P. Chou, S. F. Miller, P. Ho, and D. J. Young. CHEMKIN v. 4.0. Technical Report. San Diego, CA. Reaction Design, Inc. 2004.

[80] T. G. Kolda, R. M. Lewis, and V. Torczon. "Optimization by Direct Search: New Perspectives on Some Classical and Modern Methods". SIAM Review. 45. 3. 385–482. 2003.

[81] P. Kolodziej, and D.Stewart. . "Nitrogen Recombination on High-temperature Reusable Surface Insulation and the Analysis of its Effect on Surface Catalysis" . 22nd Thermophysics Conference. 1637. 1987.

[82] B. Koncar, I. Kljenak, and R. Mavko. "Modeling of Local Two-Phase Flow Parameters in Upward Subcooled Flow Boiling at Low Pressure". International Journal of Heat and Mass Transfer. 47. 1499–1513. 2004.

[83] K. K. Y. Kuo. Principles of Combustion. John Wiley and Sons, New York. 1986.

[84] B. E. Launder and D. B. Spalding. "The Numerical Computation of Turbulent Flow". Computer Methods in Applied Mechanics and Engineering. 3. 269–289. 1974.

[85] M. C. Leverett. “Capillary behavior in porous solids”. Transactions of the AIME. 142. 152–169. 1941.

[86] H. Li, S. A. Vasquez, H. Punekar, and R. Muralikrishnan. "Prediction of Boiling and Critical Heat Flux Using an Eulerian Multiphase Boiling Model". Paper No: IMECE2011-65539. 463–476. 2012.

[87] J. Li, Z. Zhao, et al. "On Sound Generated Aerodynamically". Proc. Roy. Soc. London. A211. 564–587. 1952.

[88] M. J. Lighthill. "A Comprehensive Kinetic Mechanism for CO, CH2O, and CH3OH Combustion". Int. J. Chem. Kinet. 39. 109-136. 2007.

[89] P. Lin. Numerical Modeling of Water Waves. Taylor & Francis. 2008.

[90] R. P. Lindsted, F. C. Lockwood, and M. A. Selim. "Rate Constants Based on Partial Equilibrium Assumptions". Internal Report No. TF/95/3, Technical report. Imperial College, London, UK. 1995.

[91] M. S. Liou. "A sequel to AUSM: AUSM+". Journal of Computational Physics. 129. 364–382. 1996.

[92] F. C. Lockwood, S. M. A. Rizvi, and N. G. Shah. "Comparative Predictive Experience of Coal Firing". In Proceedings Inst. Mechanical Engineers. 200. 79–87. 1986.

[93] J. Y. Luo, R. I. Issa, and A. D. Gosman. "Prediction of Impeller-Induced Flows in Mixing Vessels Using Multiple Frames of Reference". In I ChemE Symposium Series. 136. 549–556. 1994.

[94] B. F. Magnussen and B. H. Hjertager. "On mathematical models of turbulent combustion with special emphasis on soot formation and combustion". In 16th Symp. (Int’l.) on Combustion. The Combustion Institute. 1976.

[95] M. Manninen, V. Taivassalo, and S. Kallio. "On the mixture model for multiphase flow". VTT Publications 288. Technical Research Centre of Finland. 1996.

[96] J. Maxwell. "On Stresses in Rarified Gases Arising from Inequalities of Temperature". Philosophical Transactions of the Royal Society of London. vol. 170. p. 231–256. 1879.

[97] B. J. McBride, S. Gordon, and M. A. Reno. "Coefficients for Calculating Thermodynamic and Transport Properties of Individual Species". NASA TM-4513. October 1993.

[98] K. I. M. McKinnon. "Convergence of the Nelder-Mead Simplex Method a Nonstationary Point ". SIAM J. Optimization. 9. 1. 148–158. 1998.

[99] F.R. Menter. "Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications". AIAA Journal. 32(8). 1598–1605. August 1994.

[100] F. R. Menter and Y. Egorov. "Re-visiting the Turbulent Scale Equation". Proc. IUTAM Symp. One Hundred Years of Boundary Layer Research, Göttingen. Springer. 2004.

[101] F. R. Menter and Y. Egorov. "A Scale-Adaptive Simulation Model Using Two-Equation Models". AIAA Paper-2005-1095. Reno NV. 2005.

[102] R. Merz, J. Kruckels, J. Mayer, and H. Stetter. "Computation of Three Dimensional Viscous Transonic Turbine Stage Flow Including Tip Clearance Effects". ASME 95-GT-76. 1995.

[103] J. H. Miller, J. C. Tennehill, G. Wadawadigi, T. A. Edwards, S. L. Lawrence. "Computation of Hypersonic Flows with Finite Catalytic Walls." . Journal of Thermophysics and Heat Transfer. 9. 3. 486–493. 1995.

[104] C. V. Naik, K. V. Puduppakkam, et al. "Modeling Combustion Characteristics of Components of Model-Biodiesel at High Temperatures". WSS/CI Spring 2008 Meeting. Los Angeles, CA: 2008.

[105] J. A. Nelder and R. Mead. "A Simplex Method for Function Minimization". Computer Journal. 7. 4. 308–313. 1965.

[106] S. Nesic, A. Kahyarian, and Y. S. Choi. "Implementation of a comprehensive mechanistic prediction model of mild steel corrosion in multiphase oil and gas pipelines". Corrosion. 75 (3). 274–291. 2019.

[107] I. Nompelis, G. V. Candler and M. S. Holden. "Effect of Vibrational Nonequilibrium on Hypersonic Double-Cone Experiments". AIAA JOURNAL. 41. 11. pp. 2162–2169. 2003.

[108] Y.I. Oka et al.. "Practical estimation of erosion damage caused by solid particle impact, Part 1: Effects of impact parameters on a predictive equation". 15th International Conference on Wear of Materials. 259. 1-6. 95–101. 2005.

[109] P. J. O’Rourke. "Collective Drop Effects on Vaporizing Liquid Sprays". PhD thesis. Princeton University, Princeton, New Jersey. 1981.

[110] M. Østberg, P. Glarborg, A. Jensen, J. E. Johnsson, L. S. Pedersen, and K. Dam-Johansen. "A model of the coal reburning process". In Proc. Combust Inst. 27. 3027–3035. 1998.

[111] I. Owczarek and K. Blazej. "Recommended Critical Temperatures. Part I. Aliphatic Hydrocarbons". J. Phys. Chem. 32. 1411–1427. 2003.

[112] I. Owczarek and K. Blazej. "Recommended Critical Pressures. Part I. Aliphatic Hydrocarbons". J. Phys. Chem. 35. 1461–1474. 2006.

[113] C. Park. Review of chemical-kinetic problems of future NASA missions. I-Earth entries. Journal of Thermophysics and Heat transfer. 7(3). 385–398. 1993.

[114] S. V. Patankar. Numerical Heat Transfer and Fluid Flow. Hemisphere, Washington, DC. 1980.

[115] S. V. Patankar. Numerical Heat Transfer and Fluid Flow. McGraw-Hill. Washington, New York, London 1980.

[116] S. V. Patankar, C. H. Liu, and E. M. Sparrow. "Fully Developed Flow and Heat Transfer in Ducts Having Streamwise-Periodic Variations of Cross-Sectional Area". ASME J. of Heat Transfer. 99. 180–186. 1977.

[117] D. Y. Peng and D. B. Robinson. "A New Two-Constant Equation of State". Industrial and Engineering Chemistry: Fundamentals. 15. 59–64. 1976.

[118] R. H. Perry, D. W. Gree, and J. O. Maloney. Perry’s Chemical Engineers’ Handbook. McGraw-Hill, New York, 6th edition. 1984.

[119] A. A. F. Peters and R. Weber. "Mathematical Modeling of a 2.25 MWt Swirling Natural Gas Flame. Part 1: Eddy Break-up Concept for Turbulent Combustion; Probability Density Function Approach for Nitric Oxide Formation". Combustion Science and Technology. 110. 67–101. 1995.

[120] T. J. Poinsot and S. K. Lele. "Boundary Conditions for Direct Simulation of Compressible Viscous Flows". Journal of Computational Physics. 101. 104–129. 1992.

[121] T. J. Poinsot and L. Selle. "Actual Impedance of Nonreflecting Boundary Conditions: Implications for Computation of Resonators". AIAA Journal. 42(5). 958–964. May 2004.

[122] B. E. Poling, J. M. Prausnitz, and J. P. O’Connell. The properties of Gases and Liquids. McGraw-Hill, International Edition, 5th edition. 2007.

[123] S. B. Pope. ISAT-CK (Version 3.0) User’s Guide and Reference Manual. 2000.

[124] M. J. D. Powell. "The NEWUOA software for unconstrained optimization without derivatives". Large-Scale Nonlinear Optimization (Nonconvex Optimization and Its Applications). 83. 255–297. G. Di Pillo and M. Roma, editors. Springer. 2006.

[125] W. H. Press, S. A. Teukolsky, W. T. Vetterling, and B. P. Flannery. Numerical Recipes: The Art of Scientific Computing, Third Edition. Cambridge University Press, Cambridge, England. 2007.

[126] J. C. Ragusa. "A simple Hessian-based 3D mesh adaptation technique with applications to the multigroup diffusion equations". Annals of Nuclear Energy. Volume 35, Issue 11. 2006–2018. November 2008.

[127] C. L. Rasmussen and A. E. Rasmussen. "Sensitizing Effects of NOx on CH4 Oxidation at High Pressure". Comb. Flame. 154. 233. 1949.

[128] O. Redlich and J. N. S. Kwong. "On the Thermodynamics of Solutions. An Equation of State. Fugacities of Gaseous Solutions". Chem. Rev. 44. 3. 529-545. 2008.

[129] W. C. Reynolds. Thermodynamic Properties in SI: Graphs, Tables, and Computational Equations for 40 Substances. Department of Mechanical Engineering, Stanford University. 1979.

[130] J. W. Rose and J. R. Cooper. Technical Data on Fuel. Scottish Academic Press, Edinburgh. 1977.

[131] J. W. Rose and J. R. Cooper, editors. Technical Data on Fuels. Wiley, 7th edition. 1977.

[132] H. H. Rosenbrock. "An Automatic Method for Finding the Greatest or Least Value of a Function". Computer Journal. 3. 3. 175–184. 1960.

[133] F. Qian, L. Lu, T.Feng, and D.Yang. "Experimental and 3D Embedded Modelling for Diesel Engine SCR Deposit". International Journal of Automotive Technology. 18. 2. 219–227. 2017.

[134] Y. Saad and M. H. Schultz. "GMRES: A Generalized Minimal Residual Algorithm for Solving Nonsymmetric Linear Systems". SIAM J. Sci. and Stat. Comput. 7(3). 856–869. July 1986.

[135] A. Saxer. "A Numerical Analysis of a 3D Inviscid Stator/Rotor Interaction Using Non-Reflecting Boundary Conditions". PhD thesis. Massachusetts Institute of Technology, Cambridge, Massachusetts. March 1992.

[136] S. Sarkar and L. Balakrishnan. "Application of a Reynolds-Stress Turbulence Model to the Compressible Shear Layer". ICASE Report 90-18NASA CR 182002. 1990.

[137] H. Schlichting. Boundary-Layer Theory. 7th Edition, McGraw-Hill, New York. 1979.

[138] H. Schlichting and K. Gersten. Grenzschicht-Theorie. Springer-Verlag, Berlin, Heidelberg, New York. 1997.

[139] C. Scott. "Catalytic Recombination of Nitrogen and Oxygen on High-temperature Reusable Surface Insulation." . 15th Thermophysics Conference. 1477. 1981.

[140] A. A. Shabana. Computational Dynamics. John Wiley and Sons, New York. 1994.

[141] J. Shin and T. H. Bond. "Experimental and Computational Ice Shapes and Resulting Drag Increase for a NACA 0012 Airfoil". NASA Technical Memorandum 105743. 1992.

[142] G. M. Shroff and H. B. Keller. "Stabilization of unstable procedures: The recursive projection method". SIAM J. Numer. Anal. 30(4). 1099–1120. 1993.

[143] M. L. Shur, P. R. Spalart, M. K. Strelets, and A. K. Travin. "A Hybrid RANS-LES Approach With Delayed-DES and Wall-Modelled LES Capabilities". International Journal of Heat and Fluid Flow. 29:6. December 2008. 1638-1649.

[144] Y. R. Sivathanu and G. M. Faeth. "Generalized State Relationships for Scalar Properties in Non-Premixed Hydrocarbon/Air Flames". Combustion and Flame. 82. 211–230. 1990.

[145] Skjaeveland, S.M., Siqveland, L.M., Kjosavik, A., Hammervold Thomas, W.L., Virnovsky, G.A. . “Capillary Pressure Correlation for Mixed-Wet Reservoirs”. SPE Reservoir Eval. & Eng.. 3. (1). February, 2000.

[146] I. B. Sladkov. "Physicochemical Properties of Methyl- and Ethylhalosilanes". Russian Journal of Applied Chemistry. 74. 1801–1805. 2001.

[147] A. L. Smith. "Family Plots for Evaluating Physical Properties of Organosilicon Compounds". AIChE Journal. 40. 373–377. 1994.

[148] G. P. Smith, D. M. Golden, et al. "GRI-Mech 3.0". 2008. http://www.me.berkeley.edu/gri_mech.

[149] H. Smith, T. Lauer, M. Mayer, and S. Pierson . "Optical and Numerical Investigations on the Mechanisms of Deposit Formation in SCR Systems". SAE Int. J. Fuels Lubr.. 7. 2. 525–542. 2014. DOI: 10.4271/2014-01-1563.

[150] P. L. Smith, Jr. and M. Van Winkle. "Discharge coefficients through perforated plates at reynolds numbers of 400 to 3,000". AIChE Journal. 4(3). 266–268. 1958.

[151] D. O. Snyder, E. K. Koutsavdis, and J. S. R. Anttonen. "Transonic store separation using unstructured cfd with dynamic meshing". Technical Report AIAA-2003-3913. American Institute of Aeronautics and Astronautics, 33th AIAA Fluid Dynamics Conference and Exhibit. 2003.

[152] G. Soave. "Equilibrium Constants from a modified Redlich-Kwong equation of State". Chemical Engineering Science. 27. 1197. 1972.

[153] G. R. Somayajulu. "Estimation Procedures for Critical Constants". J. Chem. Eng. Data. 34. 106–120. 1989.

[154] P. R. Spalart, S. Deck, M. L. Shur, K. D. Squires, M. Kh. Strelets, and A. Travin. "A New Version of Detached-eddy Simulation, Resistant to Ambiguous Grid Densities ". Theoretical and Computational Fluid Dynamics. Springer Berlin / Heidelberg. Volume 20, Number 3. July, 2006.

[155] K. Stueben. "Introduction to Algebraic Multigrid". Multigrid. C. W. Oosterlee, U. Trottenberg, and A. Schuller, editors. Academic Press, New York. 413–532. 2001.

[156] Y. Sun, B. Vernham and S. A. Drenna. "Demonstration and Validation of Urea Deposit Predictions on a Practical Mid/Heavy Duty Vehicle Aftertreatment System". ILASS-Americas 29th Annual Conference on Liquid Atomization and Spray Systems. Atlanta, GA2017.

[157] M. Syamlal, W. Rogers, and T. J. O’Brien. MFIX Documentation: Volume 1, Theory Guide. DOE/METC-9411004, NTIS/DE9400087 National Technical Information Service, Springfield, VA. 1993.

[158] L. Talbot et al. "Thermophoresis of Particles in a Heated Boundary Layer". J. Fluid Mech. 101(4). 737–758. 1980.

[159] W. Tang and K. Brezinsky. "Chemical kinetic simulations behind reflected shock waves". International Journal of Chemical Kinetics. 38(2). 75–97. February 2006.

[160] R. I. Tanner. Engineering Rheology. Clarendon Press, Oxford, rev. edition. 1988.

[161] C. Temperton. "Implementation of a Self-Sorting In-Place Prime Factor FFT Algorithm". Journal of Computational Physics. 58. 283–299. 1985.

[162] P. A. Tesner, T. D. Snegiriova, and V. G. Knorre. "Kinetics of Dispersed Carbon Formation". Combustion and Flame. 17. 253–260. 1971.

[163] K. W. Thompson. "Time Dependent Boundary Conditions for Hyperbolic Systems". Journal of Computational Physics. 68. 1–24. 1987.

[164] K. W. Thompson. "Time Dependent Boundary Conditions for Hyperbolic Systems II". Journal of Computational Physics. 89. 439–461. 1990.

[165] V. Torczon. "On the Convergence of the Multidirectional Search Algorithm". SIAM J. Optimization. 1. 1. 123–145. 1991.

[166] J.C. Vogel, J.K. Eaton. "Combined Heat Transfer and Fluid Dynamic Measurements Downstream of a Backward-Facing Step". Journal of Heat Transfer. 107. 922-929.. 1985.

[167] H. Wagner. "Soot Formation in Combustion". In 17th Symp. (Int’l.) on Combustion. The Combustion Institute. 3–19. 1979.

[168] G. P. Warren, W. K. Anderson, J. L. Thomas, and S. L. Krist. "Grid convergence for adaptive methods". Technical Report AIAA-91-1592. AIAA10th Computational Fluid Dynamics Conference, Honolulu, HawaiiAmerican Institute of Aeronautics and Astronautics. June 1991.

[169] E. W. Washburn. “Note on a Method of Determining the Distribution of Pore Sizes in a Porous Material”. Proc. National Academy of Science. 7. 4. 115–116. 1921.

[170] J. M. Weiss. "Calculations of Reacting Flowfield Involving Stiff Chemical Kinetics". AIAA-99-3369. January 1999.

[171] J. M. Weiss, J. P. Maruszewski, and W. A. Smith. "Implicit Solution of the Navier-Stokes Equations on Unstructured Meshes". Technical Report AIAA-97-2103, 13th AIAA CFD Conference. Snowmass, CO. July 1997.

[172] C. Westbrook and F. Dryer. "Simplified Reaction Mechanisms for Oxidation of Hydrocarbon Fuels in Flames". Comb. Sci. Tech. 27. 31–43. 1981.

[173] D. C. Wilcox. Turbulence Modeling for CFD. DCW Industries, Inc., La Canada, California. 1998.

[174] I. Wygnanski, H.E. Fiedler. "Some Measurements in the Self-Preserving Jet". Boeing Scientific Research Labs Document D1-82-0712. . 1968.

[175] E. Zoby, A. Simmonds, and R. Gupta. "Temperature-dependent Reaction-rate Expression for Oxygen Recombination at Shuttle Entry Conditions" . 22nd Aerospace Sciences Meeting. 224. 1984.

[176] G. Zheng. "CFD Modeling of Urea Spray and Deposits for SCR Systems". SAE Technical Paper 2016-01-8077. 2016.

[177] V. Zimont, W. Polifke, M. Bettelini, and W. Weisenstein. "An Efficient Computational Model for Premixed Turbulent Combustion at High Reynolds Numbers Based on a Turbulent Flame Speed Closure". J. of Gas Turbines Power. 120. 526–532. 1998.

[178] R. Ewert and W. Schroeder. "Acoustic perturbation equations based on flow decomposition via source filtering". Journal of Computational Physics. Volume 188, Issue 2. 365–398. 2003.

[179] Blasius, P.R.H.. "Das Aehnlichkeitsgesetz bei Reibungsvorgangen in Flüssigkeiten". Forschungsheft 131. –41. 1913.