The equations shown in the last section can be resolved and equivalent results can be calculated by Rocky considering the same input data and boundary conditions. The input parameters for this verification case setup are presented in Table 2.9: Verification case input parameters..

Table 2.9: Verification case input parameters.

Parameter	Value	Unit
Physical Model:
Thermal	Disabled	-
Normal Force	Linear Spring Dashpot	-
Adhesive Force	None	-
Restitution Coefficient	Varied	-
Gravity Y	-9.81
Sphere:
Sphere Radius	0.2
Sphere Density	2,600
Friction Coefficient	0	-
Young Modulus	200,000	Pa
Plate:
X and Z dimensions	1
Young Modulus	200,000	Pa
Solver Parameters:
Simulation Duration	0.5