For details, see Domains.
Locations is the same for the Point Cloud object. For details, see Locations.
Sampling and all of the settings that correspond to it are the same for the Point Cloud object. For details, see Sampling.
The Variable setting selects a variable from the list to plot at the selected location.
Tip: Click the Location Editor 
icon to open the Variable Selector dialog box, which displays the complete list of available variables.
For details, see Hybrid and Conservative Variable Values.
The Projection setting has the following options:
| Option | Description |
|---|---|
|
|
Original vectors are plotted without any projection. |
|
|
Plots vector components aligned with a principal axis or an axis of a custom coordinate frame. |
|
|
Plots vector components normal to the location. Applicable only for surface locations. |
|
|
Plots vector components tangential to the location. Applicable only for surface locations. |
When a rotation axis is defined (set in the Turbo tab, or by reading a turbo case), the Projection setting has the following additional options:
| Option | Description |
|---|---|
|
|
Plots vector components along the rotation axis. Available when a rotation axis is defined. |
|
|
Plots vector components radially to the rotation axis. Available when a rotation axis is defined. |
|
|
Plots vector components along the theta direction about the rotation axis. Available when a rotation axis is defined. |