TRPLIS

TRPLIS, NTRP1, NTRP2, TRPINC, Opt
Lists charged particle trace points.

Valid Products: Pro | Premium | Enterprise | PrepPost | Solver | AS add-on

NTRP1, NTRP2, TRPINC

List points from NTRP1 to NTRP2 (defaults to NTRP1) in steps of TRPINC (defaults to 1). If NTRP1 = ALL, NTRP2 and TRPINC are ignored and all trace points are listed. If NTRP1 = P, graphical picking is enabled and all remaining command fields are ignored (valid only in the GUI).

Opt

Opt = LOC lists the trace point number location (X, Y, Z). Default.

Opt = PART lists the trace point number particle settings (velocity, charge, mass).

Notes

Lists the charged particle trace points in the active display coordinate system (DSYS). Trace points are defined with the TRPOIN command.

Menu Paths

Main Menu>General Postproc>Plot Results>List Trace Pt