SPLOT

SPLOT, NA1, NA2, NINC, MESH
Displays the selected areas and a faceted view of their underlying surfaces

PREP7: Areas

NA1: Starting area for display of areas and underlying surfaces. If NA1 = ALL (default), NA2 and NINC are ignored and all selected areas are displayed (ASEL command).
NA2: Last area to be displayed.
NINC: Numeric value setting steps between NA1 and NA2 for display. Default value is (1).
MESH: Specifies a rectangular mesh density used to display the underlying surface (default 4, i.e. 4 x 4).

Notes

This command is valid in any processor. The plot output displays the external and internal trim curves and underlying surface. You cannot obtain a faceted view of your surface areas when you are using the /EXPAND command to create larger graphics displays.

Use APLOT for trimmed surface display.

Menu Paths

This command cannot be accessed from a menu.