MLIST

MLIST, NODE1, NODE2, NINC
Lists the MDOF of freedom.

SOLUTION: Master DOF

NODE1, NODE2, NINC: List master degrees of freedom from NODE1 to NODE2 (defaults toNODE1) in steps of NINC (defaults to 1). If NODE1 = ALL (default), NODE2 and NINC are ignored and masters for all selected nodes (NSEL) are listed. If NODE1 = P, graphical picking is enabled and all remaining command fields are ignored (valid only in the GUI). A component name may also be substituted for NODE1 (NODE2 and NINC are ignored).

Notes

Lists the master degrees of freedom.

For the free-interface CMS method analysis (CMSOPT,FREE), any pseudo-constraints applied on master degrees of freedom with SUPPORT = ON in the M command will be listed when MLIST is issued after CMSOPT (see example printout below).

    NODE  LABEL     SUPPORT  
     8529  UX
     8529  UY
     8529  UZ  
     8545  UX         ON
     8545  UY         ON
     8545  UZ         ON

Menu Paths

Main Menu>Preprocessor>Loads>Master DOFs>List All

Main Menu>Preprocessor>Loads>Master DOFs>List Picked

Main Menu>Solution>Master DOFs>List All

Main Menu>Solution>Master DOFs>List Picked

Utility Menu>List>Other>Master DOF>At All Nodes

Utility Menu>List>Other>Master DOF>At Picked Nodes