MAP

MAP, --, kDIM, --, kOUT, LIMIT
Maps pressures from source points to target surface elements.

Valid Products: Pro | Premium | Enterprise | PrepPost | Solver | AS add-on

--

Unused field.

kDIM

Interpolation key:

0 or 2

 — 

Interpolation is done on a surface (default).

3

 — 

Interpolation is done within a volume. This option is useful if the supplied source data is volumetric field data rather than surface data.

--

Unused field.

kOUT

Key to control how pressure is applied when a target node is outside of the source region:

0

 — 

Use the pressure(s) of the nearest source point for target nodes outside of the region (default).

1

 — 

Set pressures outside of the region to zero.

LIMIT

Number of nearby points considered for interpolation. The minimum is 5; the default is 20. Lower values reduce processing time. However, some distorted or irregular meshes will require a higher LIMIT value to find the points encompassing the target node in order to define the region for interpolation.

Notes

Maps pressures from source points to target surface elements.

Menu Paths

This command cannot be accessed from a menu.