DOF

DOF, Lab1, Lab2, Lab3, Lab4, Lab5, Lab6, Lab7, Lab8, Lab9, Lab10
Adds degrees of freedom to the current DOF set.

PREP7: Element Type

Product Restrictions

Lab1, Lab2, Lab3, . . . , Lab10: Valid labels are: UX, UY, UZ (structural displacements); ROTX, ROTY, ROTZ (structural rotations); TEMP, TBOT, TE2, TE3, . . ., TTOP (temperatures); PRES (pressure); VOLT (voltage); MAG (magnetic scalar potential); AZ (magnetic vector potential); CURR (current); EMF (electromotive force drop); CONC (concentration); DELETE.

Command Default

Use degree of freedom set determined from element types.

Notes

The degree of freedom (DOF) set for the model is determined from all element types defined. This command may be used to add to the current set. The ALL label may be used on some commands to represent all labels of the current degree of freedom set for the model. Issue the DOF command with no arguments to list the current set. Use the DELETE label to delete any previously added DOFs and return to the default DOF set.

Product Restrictions

Command Option Lab	Available Products
UX, UY, UZ, ROTX, ROTY, ROTZ	Pro \| Premium \| Enterprise \| PrepPost \| Solver \| AS add-on
MAG, VOLT	Pro \| Premium \| Enterprise \| PrepPost \| Solver \| AS add-on
AZ	Pro \| Premium \| Enterprise \| PrepPost \| Solver \| AS add-on
PRES	Pro \| Premium \| Enterprise \| PrepPost \| Solver \| AS add-on
TEMP, TBOT, TE2, TE3	Pro \| Premium \| Enterprise \| PrepPost \| Solver \| AS add-on
CURR, EMF	Pro \| Premium \| Enterprise \| PrepPost \| Solver \| AS add-on
CONC	Pro \| Premium \| Enterprise \| PrepPost \| Solver \| AS add-on
DELETE	Pro \| Premium \| Enterprise \| PrepPost \| Solver \| AS add-on

Menu Paths

Main Menu>Preprocessor>Element Type>Add DOF

Main Menu>Preprocessor>Element Type>Remove DOFs