DLDELE

DLDELE, LINE, Lab
Deletes DOF constraints on a line.

Valid Products: Pro | Premium | Enterprise | PrepPost | Solver | AS add-on

LINE

Line for which constraints are to be deleted. If ALL, delete for all selected lines (LSEL). If LINE = P, graphical picking is enabled and all remaining command fields are ignored (valid only in the GUI). A component name may also be substituted for LINE

Lab

Constraint label:

ALL

 — 

All constraints.

SYMM

 — 

Symmetry constraints.

ASYM

 — 

Antisymmetry constraints.

UX

 — 

Displacement in X direction.

UY

 — 

Displacement in Y direction.

UZ

 — 

Displacement in Z direction.

ROTX

 — 

Rotation about X axis.

ROTY

 — 

Rotation about Y axis.

ROTZ

 — 

Rotation about Z axis.

WARP

 — 

Warping magnitude.

PRES

 — 

Pressure.

TEMP, TBOT, TE2, TE3, . . ., TTOP

 — 

Temperature.

VOLT

 — 

Electric scalar potential.

AZ

 — 

Magnetic vector potential in Z direction.

CONC

 — 

Concentration.

Notes

Deletes the degree of freedom constraints (and all corresponding finite element constraints) on a line previously specified with the DL command. See the DDELE command for delete details.

Warning:  On previously meshed lines, all constraints on affected nodes will also be deleted, whether or not they were specified by the DL command.

This command is also valid in PREP7.

Menu Paths

Main Menu>Preprocessor>Loads>Define Loads>Delete>All Load Data>All Constraint>On All Lines
Main Menu>Preprocessor>Loads>Define Loads>Delete>Electric>Boundary>PerfEC>On Lines
Main Menu>Preprocessor>Loads>Define Loads>Delete>Electric>Boundary>Voltage>On Lines
Main Menu>Preprocessor>Loads>Define Loads>Delete>Fluid/ANSYS>Pressure DOF>On Lines
Main Menu>Preprocessor>Loads>Define Loads>Delete>Magnetic>Boundary>VectorPot>On Lines
Main Menu>Preprocessor>Loads>Define Loads>Delete>Structural>Displacement>On Lines
Main Menu>Preprocessor>Loads>Define Loads>Delete>Thermal>Temperature>On Lines
Main Menu>Solution>Define Loads>Delete>All Load Data>All Constraint>On All Lines
Main Menu>Solution>Define Loads>Delete>Electric>Boundary>PerfEC>On Lines
Main Menu>Solution>Define Loads>Delete>Electric>Boundary>Voltage>On Lines
Main Menu>Solution>Define Loads>Delete>Fluid/ANSYS>Pressure DOF>On Lines
Main Menu>Solution>Define Loads>Delete>Magnetic>Boundary>VectorPot>On Lines
Main Menu>Solution>Define Loads>Delete>Structural>Displacement>On Lines
Main Menu>Solution>Define Loads>Delete>Thermal>Temperature>On Lines