This procedure shows how to set up the loudspeakers for 3D sound restitution.
To Set Up Loudspeakers:
Prerequisites: You need two loudspeakers, a table or a furniture with a plane surface and a listener.
-
Make sure the two loudspeakers conform to a geometric setup (see the drawing below ) in
order to enable and preserve 3D sound effect during the playback.
-
Place the listener at 1-meter distance from the table.
-
Place the loudspeakers on the table facing the listener.
Tip:
The listener's head must be in the middle axis of the speakers.
Note:
Set the angle of spacing between the speakers according to the
specifications of the transaural filter you use, see the
Transaural Filters
table.
The loudspeakers are set.