Managing a Transaural Filter

This procedure shows how to verify the transaural filter information and to load new filters.

To Manage a Transaural Filter:

Prerequisites: You need one or more transaural filters saved in bin format.
  1. If you want to know the transaural filter currently loaded in the software, click Modules > 3D sound transaural > Information.
    Tip: You can also look at the status bar at the bottom of the window to know the current filter and the processing status.
  2. If you want to load a transaural filter, click Modules > 3D sound transaural > Load a filter, then select a filter in bin format and click OK.
    Note: A set of filters is supplied with the module, see further information here.

The transaural filter information is verified and the required filter is loaded.