Saving/Exporting a Signal

This section allows you to save and send the original signal, resulting signals and/or their mix to Sound: Analysis and Specification.

To Save/Export a Signal:

Prerequisites: You need to compute a sound extraction.
  1. Go to the Save/Export tab, then to the Signals tab.
  2. In Signal selection, select the signals to be saved.
  3. In Task, select the save/export format:

    • Save as a WAV file then,

      • Make sure a save directory is defined.

      • In Signal name rename the file.

        Note: An output signal naming convention is defined so that each signal's name format is signal name_selected sound component for example: Bird_plus_idle_original, Bird_plus_idle_noise, Bird_plus_idle_tonal, Bird_plus_idle_transient, Bird_plus_idle_remainder, Bird_plus_idle_mix.

    • Transfer to Sound: Analysis and Specification then,

      • In Signal name rename the file.

      • If needed, select Transfer signals to the same window.

  4. If the extraction is not computed, click Compute.
  5. In Save/Export, click:

    • Save to save the signal file in the destination folder.

    • Transfer to open the signal file is in a temporal window in Sound: Analysis and Specification.

The signal saving or export is complete.