Generating a Profile

This procedure shows how to generate a profile for a broadband noise or harmonics source that is included in a Sound Composer Track.

To Generate a Profile:

Prerequisites: You need a Sound Composer source with a Broadband Noise or Harmonics Source type.
  1. Click Source control > Load > Create a Profile.
  2. Next to Between, set the start value and the end value in the expected unit of the profile. You can find these values in the source file that was used to create the track.
  3. Set the Duration in seconds.
  4. From the Curve drop-down list, select the curve type: Linear or Logarithmic.
  5. Click OK.
The profile is associated with the broadband noise source.
Tip: Click Display Profile to open the profile in a new window.
To save the profile association, save the track.