This procedure shows how to generate a signal from a spectrum.
To Generate a Signal from a Calculated Spectrum:
You need a spectral data file (*.xml, *.txt, *.csv or *.spectre) complying
with the supported types. For more
details about *.txt spectral data file, see Source Formats.
-
Click File > Generate signal from
spectrum... then select a spectrum file.
The Signal generation from spectrum
window is displayed.
-
In the Signal generation from spectrum window,
type a Duration in seconds.
Note:
The sound created from spectrum calculation is stationary whatever the
duration.
-
Set the Sampling
Frequency in Hertz. Make sure that you set a sampling frequency value higher than
twice the maximum frequency contained in the frequency axis of the spectrum.
-
From Method,
choose:
Inverse FFT to use a spectrum inversion
or,
Harmonic Method to use a sinusoidal
interpolation or,
Automatic to use an hybrid
method that mixes Inverse FFT and Harmonic to improve the sound quality.
-
Click Generate.
-
Click Play $ to
listen.
-
Go to to create a WAV
file.
The sound is created, and its waveform is displayed into a temporal window.