Maximal Level Controller

  • If you want to modify display's parameters, click Edit, Maximal Level Controller or .

    You can select a level to modify the value. Press Enter to validate the change.

    You can right-click and select Copy to clipboard.

    When modifying minimum or maximum value, you can select the Intermediate levels auto-update check box to compute all intermediate values. The minimum and maximum levels are set according to the minimum and maximum luminance detected in the map.

    If needed, you can add or delete a level.

    Note: Adding or deleting a level on the current scale changes the color threshold of each level as it depends on the number of level added.

  • Click Default to cancel all modifications.

    Check IsoCurve to display the contour lines on the iso levels.

    Check Filled to display only the contour lines without the iso levels. The contour lines are then colored according to the corresponding scale level.

    Click Linear or Log to switch between a linear or logarithmic scale. Click Load Scale or Save Scale to load or save parameters in a scale file. Format is .scl.

    When Iso levels, Black to Color (Custom) or Black to White (Custom Color) is selected in the color list, you can click to change the color(s) to display in the Level.

  • Click 1:1 Scale to use the White Point Luminance value specified in the Monitor tab of the Preferences as a default value for the scale. This allows you to have a 1:1 scale for the luminance map where values are below the maximum screen value.