XML Template Overview
The following page presents you the different ways of managing and using XML templates generated out of a XMP map.
Description
A XML template file contains information that has been saved out of the current opened XMP map state. These information can then be applied to another XMP map in the viewer as presets or to a future xmp generated in Speos.
- the map information
- the display options
- the VLC information
- the measures information
- Export Template command
- Save Display Options as default command
Export Template
When exporting a template using Export Template, you manually save the template with the different aforementioned information. Manually saving the template means that you define the save folder and the template name.
- use the template as input of a Speos sensor to apply the measures saved to the future xmp to be generated out of the sensor, and the sensor properties (dimensions, display properties, sensor type).
- import the template in the viewer to apply the information to a loaded XMP map as presets.
Save Display Option as default and Load Display default
With Save Display Option as default, you save the same information as Export Template in a dedicated XML template file.
With Load Display default, you apply in one click the display options saved with the Save Display Option as default command.
The goal is to facilitate the process of display option configuration to avoid setting them each time you need to.
Example: when working on a series of results of the same type, from the same project, you can easily set the same display properties to your results, which will avoid you setting manually the properties for each result.
Save Display Option as default
With Save Display Option as default, you save the same information as Export Template in a dedicated XML template file. However, unlike Export Template, you do not need to manually create the XML template file. The viewer automatically creates the XML template file in the %appdata% folder and names it according to the XMP map from which it has been saved.
The file naming follows a strict pattern which depends on the loaded XMP map characteristics.
Load Display default
With Load Display default, you apply in one click the display options saved with the Save Display Option as default command, without having to manually import the XML file.
With Load Display default, only the display options are applied to the XMP map loaded.
CAUTION: Load Display default is different from the Apply display options command of Import Template. Indeed, if you apply the display options using Import Template, you will also apply VLC information to the XMP map.CAUTION: Load Display default is different from the Apply measures command of Import Template. Indeed, if you apply the measures using Import Template, you will also apply areas, measures and rules to the XMP map.You can only use Load Display default for same type of XMP maps.
Example: you can load the Colorimetric_irradiance.xml template for a colorimetric irradiance XMP map, but you cannot load a Spectral_irradiance.xml template.
-
The Regulation options
These options are available only for Intensity maps in Virtual Photometric Lab.
-
The Overlap Grid option
This option is available only for Intensity maps in Virtual Photometric Lab.
-
The Visibility option
This option is available only for Intensity maps in Virtual Photometric Lab.
-
The Photometric units and Radiometric units options
These options are available only for Colorimetric and Spectral maps in Virtual Photometric Lab.
The options From source looking at sensor and From sensor looking at source
These options are available only for Intensity maps in Virtual Photometric Lab.
-
The Level tool information
The Level tool is only available in Virtual Photometric Lab.
-
The Color mode
The Color mode is only available in Virtual Photometric Lab.
- The right-click menu options:
- Show rule
- Ruler parameters
- Show axis on cross
- Snap cross to grid
- Show tooltip
- Color arount the map
- Fille shape
- Show primary grid
- Show secondary grid
- Grid Parameters
- Show flux
- Show minimum
- Show maximum
- The XMP Filtering options
- The Grid view in simulation report option (Measure tool)
- The column selection and display in the Measure tool