Ansys LS-DYNA

The following properties can be exported to Ansys LS-DYNA, depending on which record you are exporting and which model you select.

Default unit system is mm–g–ms, with stress and density values scaled to align with LS-DYNA’s native unit system. In the ‘mm–g–ms (Consistent)’ unit system, all stress quantities are exported in GPa, and Density is exported in kg/mm³.

MaterialUniverse

Note: This feature is only available in Level 3 databases of Granta EduPack 2026 R1.
  • Density
  • Elongation
  • Poisson's ratio
  • Tangent modulus
  • True plastic stress-strain
  • Yield strength (elastic limit)
  • Young's modulus

Global Polymers Plastics

  • Density
  • Poisson's ratio
  • Young's modulus
  • Prony Shear Relaxation | Number of Terms
  • Prony Shear Relaxation | Relative Moduli
  • Prony Shear Relaxation | Relaxation Time
  • Prony Volumetric Relaxation | Number of Terms
  • Prony Volumetric Relaxation | Relative Moduli
  • Prony Volumetric Relaxation | Relaxation Time

MMPDS

  • Density
  • Elongation, L
  • Modulus, L
  • Poisson's Ratio (L-dir) with Temp.
  • Poisson's Ratio, L
  • Tens. Yield Stress (L-dir) with Temp.
  • Tensile Modulus (L-dir) with Temp.
  • Tensile Stress/Strain, L
  • Yield Strength, L