Ansys Mechanical APDL (Ansys Classic)
The following properties can be exported to Mechanical APDL, depending on which record you are exporting and which model you select.
Note: This feature is only available in Level 3 databases of
Granta EduPack 2026 R1.
Note: Only compatible with Ansys Mechanical APDL v15 (Ansys Classic).
MaterialUniverse
- Density
- Density with temperature
- Electrical resistivity
- Electrical resistivity with temperature
- Poisson's ratio
- Shear modulus
- Specific heat capacity
- Specific heat capacity with temperature
- Thermal conductivity
- Thermal conductivity with temperature
- Thermal expansion coefficient
- Thermal expansion coefficient with temperature
- Young's modulus
- Young's modulus with temperature
Global Polymers Plastics
- CLTE, Flow
- CLTE, Flow (TMA)
- CLTE, Transverse
- Coeff of Thermal Expansion vs. Temperature
- Density
- Density vs. Temperature
- Poisson's Ratio
- Poisson's Ratio vs. Temperature
- Shear Modulus
- Shear Modulus vs. Temperature
- Shear Modulus vs. Temperature, Dynamic
- Specific Heat Capacity
- Specific Heat Capacity vs. Temperature
- Tensile Modulus
- Tensile Modulus vs. Temperature
- Tensile Modulus vs. Temperature, Dynamic
- Thermal Conductivity
- Thermal Conductivity vs. Temperature
- Volume Resistivity
- Volume Resistivity vs. Temperature
MMPDS
- Density
- Electrical Conductivity
- Modulus, L
- Poisson's Ratio (L-dir) with Temp.
- Poisson's Ratio, L
- Shear Modulus (in-plane L-LT) with Temp.
- Shear Modulus, L
- Specific Heat
- Specific Heat with Temp.
- Tensile Modulus (L-dir) with Temp.
- Thermal Conductivity
- Thermal Conductivity with Temp.
- Thermal Expansion
- Thermal Expansion with Temp.