General Options: Component Libraries Options

These options are set in Component Libraries Options under General in the Options dialog box.

You can Use extractor mode by default for separate dynamic link desktops by selecting the check box.

You can Run affected property callbacks when variable changes value by selecting the check box.

The Component Tree Options panel contains these controls:

• Show Favorites specifies that a list of favorites, in the form of an expandable tree, displays in the Component Libraries’s Components tab window.
• Show Most Recently Used specifies that a list of the components you have most recently used displays in the project window.
• Most Recently Used list contains specifies the number of recently used components to display.

The Search Options area contains the following controls:

• Use Set to determine whether searches are performed on All components, Current list only, or Append to current list.
• Load Libraries at Initialization – When selected, Twin Builder pre-loads all system and configured libraries into the Component Libraries search database when the Component Libraries are initialized at Twin Builder startup. Clear this option to reduce the startup time of Twin Builder, in which case the libraries are loaded at first search.