Setting the Maximum Number of Solutions
For Interpolating sweeps.
The Max Solutions value is the maximum number of solutions that will be solved for the frequency range. For fast sweeps and for interpolating sweeps the default is 250. The value must be greater than 3. To change the value:
- Open the Edit Sweep dialog box (by either viewing the properties of an existing Sweep or by Adding a Frequency sweep to an existing Setup).
- Type a value in the Max Solutions box and click OK.
If you expect to use the same settings often, you can click Set Defaults. To use previously saved settings, click Use Defaults.
Note:
HFSS automatically subdivides the interpolating sweep range so that no single subrange gets too many basis elements. The effect is that you can now (if appropriate) request hundreds of basis elements in the Max Solutions box for interpolating sweep setup, without incurring any basis seeding performance penalty.