The interface works in a Reader mode.
This is a stand-alone reader which does not require that the SOLIDWORKS system be installed.
No CAD associativity support.
No CAD Parameter support.
The interface can be configured during Ansys installation or by using the Product & CAD Configuration Manager.
See Product & CAD Configuration Manager for usage information.
For detailed installation information about the Product & CAD Configuration Manager, see:
Support
At the time of release, detailed version support information for the Windows platform is accessible via Geometry Interface Support.
For information about post-release CAD system compatibility with Ansys Workbench, see the Platform Support section of the Ansys Website.
Document import supported by interface: Part (*.sldprt) and Assembly (*.sldasm)
Versions: 97 up to 2025 (Windows & Linux)
Table 23: Import Preference Support for SOLIDWORKS Reader Interface
| Import Solid Bodies | Yes | ||
| Import Surface Bodies | Yes | ||
| Import Line Bodies | Yes | ||
| Parameter Processing and prefix/suffix key | No | ||
| Attribute Processing and prefix | Yes - Color | ||
| Named Selection Processing and prefix | Yes - Color | ||
| Material Processing | Yes | ||
| Analysis Type |
| ||
| Associativity | No | ||
| Coordinate Systems | No | ||
| Work Points | No | ||
| Reader Save File | No | ||
| Instancing | No | ||
| Smart Update | No | ||
| Enclosure and Symmetry Processing | No | ||
| Mixed Import Resolution | No | ||
| Decompose Disjoint Geometry | Yes |
Notations
Selective Update — This interface fully supports the Selective Update feature.
Length Unit — The length unit specified in the part or assembly is automatically read from the geometry file and is transferred into Ansys Workbench. The Length Unit field in the Details will be read-only. If a unit system is not detected in the geometry file, the Length Unit field in the Details will be active, allowing the Length Unit to be specified.
Hidden parts — Parts that are hidden or suppressed in SOLIDWORKS are skipped automatically by this interface.
Import CAD Color as Named Selections — To import an object's Color as Named Selections in Ansys Workbench, specify the "Named Selections" option and set the "Named Selections Key" to "Color" or a list of specific Colors delimited by a semicolon (for example: "Color:255.0.0; Color:255.255.0").
Caveats and Known Issues
Limited Support — Non-Commercial, Education Edition, Alpha, Beta, and PR versions (even of supported official versions) are not supported.
Limitations
Limited Support for Virtual Assemblies — The SOLIDWORKS reader does not support pure Virtual Assemblies. To import a Virtual Assembly then the supporting parts must also be saved as part files.
Troubleshooting
See the SOLIDWORKS Errors Related to CAD Integration section in CAD Integration Troubleshooting for detailed information.