The interface works in a Reader mode.
This is a stand-alone reader that does not require the NX system be installed.
No CAD associativity support.
No CAD Parameter support.
This interface can be configured during Ansys installation or by using the Product & CAD Configuration Manager.
See Product & CAD Configuration Manager for usage information.
For detailed installation information about the Product & CAD Configuration Manager, see:
Support
At the time of release, detailed version support information for the Windows platform is accessible via Geometry Interface Support.
For information about post-release CAD system compatibility with Ansys Workbench, see the Platform Support section of the Ansys Website.
Document import supported by interface: Part (*.prt) and Assembly (*.prt)
Versions: UG11 to UG18, UG NX, NX5 to NX12, NX1847 to NX2506 (Windows & Linux)
Table 16: Import Preference Support for NX Reader Interface
| Import Solid Bodies | Yes | ||
| Import Surface Bodies | Yes | ||
| Import Line Bodies | Yes | ||
| Parameter Processing and prefix/suffix key | No | ||
| Attribute Processing and prefix | Yes - Color and Layer | ||
| Named Selection Processing and prefix | Yes - Color and Layer | ||
| Material Processing | Yes | ||
| Analysis Type |
| ||
| Associativity | No | ||
| Coordinate Systems | Yes | ||
| Work Points | Yes | ||
| Reader Save File | No | ||
| Instancing | No | ||
| Smart Update | No | ||
| Enclosure and Symmetry Processing | No | ||
| Mixed Import Resolution | No | ||
| Decompose Disjoint Geometry | Yes |
Notations
Selective Update — This interface fully supports the Selective Update feature.
Length Unit — The length unit specified in the part or assembly is automatically read from the geometry file and is transferred into Ansys Workbench. The Length Unit field in the Details will be read-only. If a unit system is not detected in the geometry file, the Length Unit field in the Details will be active, allowing the Length Unit to be specified.
Hidden Parts — Parts that are hidden, blanked or suppressed in NX are skipped automatically by this interface.
Import CAD Color as Named Selections — To import an object's Color as Named Selections in Ansys Workbench, specify the "Named Selections" option and set the "Named Selections Key" to "Color" or a list of specific Colors delimited by a semicolon (for example: "Color:255.0.0; Color:255.255.0").
Import CAD Layer as Named Selections — To import objects that are assigned a Layer as Named Selections in Ansys Workbench, specify the "Named Selections" option and set the "Named Selections Key" to "Layer" or a list of specific Layers delimited by a semicolon (for example: "Layer:0;Layer:1;Layer:3").
Caveats and Known Issues
Limited Support — Non-Commercial, Education Edition, Alpha, Beta, and PR versions (even of supported official versions) are not supported.
Troubleshooting
No known issues have been identified in the CAD Integration Troubleshooting section.