This section describes how to deal with the following problems:

• 26.1.1. A Linearized Stress Result Cannot Be Solved.
• 26.1.2. A Load Transfer Error Has Occurred.
• 26.1.3. A Master Node is Missing from the Condensed Part
• 26.1.4. Although the Exported File Was Saved to Disk
• 26.1.5. Although the Solution Failed to Solve Completely at all Time Points.
• 26.1.6. An Error Occurred Inside the SOLVER Module: Invalid Material Properties
• 26.1.7. An Error Occurred While Solving Due To Insufficient Disk Space
• 26.1.8. An Error Occurred While Starting the Solver Module
• 26.1.9. An Internal Solution Magnitude Limit Was Exceeded.
• 26.1.10. An Iterative Solver Was Used for this Analysis
• 26.1.11. At Least One Body Has Been Found to Have Only 1 Element
• 26.1.12. At Least One Spring Exists with Incorrectly Defined Nonlinear Stiffness
• 26.1.13. Animation Does not Export Correctly
• 26.1.14. Application Not Closing as Expected
• 26.1.15. Assemblies Missing Parts
• 26.1.16. Cannot Undo Node Move
• 26.1.17. CATIA V5 and IGES Surface Bodies
• 26.1.18. Constraint Equations Were Not Properly Matched
• 26.1.19. Element n Located in Body (and maybe other elements) Has Become Highly Distorted
• 26.1.20. Error Inertia tensor is too large
• 26.1.21. Equivalent Creep Strain Ratio has Exceeded the Specified Limit Value
• 26.1.22. Failed to Load Microsoft Office Application
• 26.1.23. Illogical Reaction Results
• 26.1.24. Large Deformation Effects are Active
• 26.1.25. Missing fonts for the Docking Pane Buttons (Linux Platform Only)
• 26.1.26. MPC equations were not built for one or more contact regions or remote boundary conditions
• 26.1.27. One or More Contact Regions May Not Be In Initial Contact
• 26.1.28. One or more MPC or Lagrange Multiplier formulation based contact may have conflicts
• 26.1.29. One or More Parts May Be Underconstrained
• 26.1.30. One or More Remote Boundary Conditions is Scoped to a Large Number of Elements
• 26.1.31. Problems Unique to Background (Asynchronous) Solutions
• 26.1.32. Problems Using Solution
• 26.1.33. Proxy Server Environment Variable
• 26.1.34. Remote Points with Overlapping Geometry Selections are not Recommended within a Condensed Part
• 26.1.35. Running Norton AntiVirusTM Causes the Mechanical Application to Crash
• 26.1.36. The Correctly Licensed Product Will Not Run
• 26.1.37. The Deformation is Large Compared to the Model Bounding Box
• 26.1.38. The Initial Time Increment May Be Too Large for This Problem
• 26.1.39. The Joint Probe cannot Evaluate Results
• 26.1.40. The License Manager Server Is Down
• 26.1.41. Linux Platform - Localized Operating System
• 26.1.42. The Low/High Boundaries of Cyclic Symmetry
• 26.1.43. The Remote Boundary Condition object is defined on the Cyclic Axis of Symmetry
• 26.1.44. The Solution Combination Folder
• 26.1.45. The Solver Engine was Unable to Converge
• 26.1.46. The Solver Has Found Conflicting DOF Constraints
• 26.1.47. Problem with RSM-Mechanical Connection
• 26.1.48. Unable to Find Requested Modes
• 26.1.49. You Must Specify Joint Conditions to all Three Rotational DOFs
• 26.1.50. Fracture Meshing Problems
• 26.1.51. Lustre Parallel File Systems on Linux
• 26.1.52. An Error Occurred Inside the SOLVER Module