1.5. Create Drivetrain Driving Scenario

Create a Power Load for the shaft objects as follows:

  1. Select the Shaft_Flexible object in the Motion tree.

  2. In the Details panel, under Power Load, set Role to Input.

  3. Set Remote Point to RP_S_M.

  4. Select the Shaft_Beam object in the Motion tree.

  5. In the Details panel, under Power Load, set the following parameters:

    ParameterValue
    RoleOutput
    Base PointStart
    Distance30mm
    Reduction Ratio2.353

Create a Drivetrain Driving Scenario object as follows:

  1. Select the Motion branch in the Project tree.

  2. In the Motion ribbon, select DriveTrain Toolkit and then Drivetrain Driving Scenario.

  3. In the Details panel for the new object set the following parameters:

    ParameterValue
    Input ShaftShaft_Flexible
    Input Speed TypeAcceleration
    Rotating DirectionCounterclockwise
    Input Power TypeConstant
    Input Power1W
    Max Moment100000 Nmm
    Duration1s
    Start Speed0rpm
    End Speed200rpm
    Interpolation TypeSpecify Number of Interpolation Data
    Number of Interpolated Data100