After successfully completing this tutorial, you should proceed to the next demonstration. Although the next tutorial contains some material applicable to all users, it is intended primarily for analysts doing computational fluid dynamics (CFD) work. If your application area is not CFD, you may wish to consider skipping the next chapter and proceeding directly to Structural Mechanics Example.
The Ansys EnSight How-To Manual contains details on the operations covered in this chapter. The following online articles are relevant to the topics covered here.
Note: You get to these by selecting Help from the main menu, then How to manual... (Help → How to manual...), then the topic indicated below.
Consult... | For More Information On... |
---|---|
How To Read Data | Specifying data to read into EnSight. |
How To Rotate, Zoom, Translate, Scale | Performing transformations in the Graphics Window as well as performing precise transformations using the Transformation Editor. |
How To Reset Tools and Viewports | Resetting transformations back to the default settings. |
How To Select Parts | Selecting parts. |
How To Set Attributes | Setting part attributes. |