When you have a solved project that has design points, if a project report has been generated, you can preview design point images from the report in the Parameter Set tab.
To view report images:
In the Project Schematic, right-click the Results cell and select Properties.
In the Properties pane, select the Publish Report check box.
In the toolbar, click Update All Design Points.
When the project has updated, click the Parameter Set bar.
In the Properties pane, under Design Point Report, note the list of PNG files that are available for design points in the Report Image field.
The image files are located in the following directory:
[project_location]\dp[current_design_point]\[system_type]\Post\Report\ReportDouble-click the Parameter Set bar.
In the design points table, click a thumbnail in the Report Image column to open the image file.
To clear the images, in the Properties pane, set Report Image to None.
Note: The image in the Report Image column is the default image for a CFX or Fluent report (Generic Report Figure 1). To have a different image:
Set up CFD-Post to display the image you want in the report.
Click the Figure icon in the toolbar.
In the Outline pane, disable Generic Report Figure 1 and enable Figure 1.
In Workbench, click Update All Design Points.