Context options are available for working with System Coupling solutions. In the System Coupling tab's Outline of Schematic, you can access these options by right-clicking the Solution node or any of the child nodes defined underneath it.
From the Solution node, you can:
Update the solution;
Continue Calculation if the solution was interrupted;
Refresh the solution;
Clear Generated Data; and
Reset the solution.
These commands are the same as those available on System Coupling's Solution cell in the Project Schematic.
From the Chart Monitor node, you can:
Right-click Chart Monitor and select Create Chart to create a new System Coupling chart.
Right-click a Chart node and select Add Variable or Remove Variable to change the variables plotted on the chart.
Right-click a chart variable and select Rename or Delete.
Display Validation Failure:
Select this option to display error messages when System Coupling's Solution items are found to be incorrect due to validation problems.
Note: If a coupled analysis is interrupted before reaching the specified coupling duration, then the Solution cells stay in an Update Required state once execution stops because the calculation must be continued to complete the analysis. You can refresh and/or update downstream Results cells to review the results generated up to the point at which the analysis was interrupted.
For more information on typical cell states, see Understanding Cell States in the Workbench User's Guide.