In System Coupling's Transcript, a Mapping Summary was generated at analysis initialization. The diagnostics indicate that:
For the loss transfers, all target and source nodes were successfully mapped.
For the temperature transfer:
All target nodes were successfully mapped.
Between 99% and 100% of the source nodes were successfully mapped.
No further investigation of mapping is necessary.
Figure 28: System Coupling's mapping diagnostics at analysis initialization
+-----------------------------------------------------------------------------+ | MAPPING SUMMARY | +-----------------------------------------------------------------------------+ | | Source Target | +-----------------------------------------------------------------------------+ | Rotor | | | Rotor Losses | | | Mapped Area/Volume [%] | 100 100 | | Mapped Elements [%] | 100 100 | | Mapped Nodes [%] | 100 100 | | Stator | | | Stator Losses | | | Mapped Area/Volume [%] | 100 100 | | Mapped Elements [%] | 100 100 | | Mapped Nodes [%] | 100 100 | | Magnets | | | Magnet Losses | | | Mapped Area/Volume [%] | 100 100 | | Mapped Elements [%] | 100 100 | | Mapped Nodes [%] | 100 100 | | Magnet Temperatures | | | Mapped Area/Volume [%] | 100 100 | | Mapped Elements [%] | 100 100 | | Mapped Nodes [%] | >99 100 | +-----------------------------------------------------------------------------+
Note: If you wish to verify, you can open the results in EnSight and review the mapping for each data transfer.