Start the System Coupling GUI

Start the System Coupling GUI.

  1. Start System Coupling's GUI according to the platform you are using:

    • Windows:

      • Start Menu:

        From the Start menu, select Ansys 2024 R2 > System Coupling 2024 R2.

      • Command Prompt:

         
 
> "%AWP_ROOT242%\SystemCoupling\bin\systemcoupling" --gui

    • Linux:

       
 
$ "$AWP_ROOT242/SystemCoupling/bin/systemcoupling" --gui

      Note:  Before starting System Coupling on Linux, ensure that the ANSYSEM_ROOT242 environment variable is set to the location of your Ansys EM Suite installation.

    The System Coupling GUI opens. Because you are required to select a coupling working directory before starting to populate the data model, the Select working directory dialog opens immediately.

  2. Navigate to the ElectricMotor co-simulation working directory, select the directory, and click Select Folder.

    The Select Folder dialog closes and the System Coupling GUI opens in the selected directory.

Note:  The Action Required ( ) messages shown on the Messages tab will be removed as the corresponding parts of the analysis are defined. As new settings are added, additional messages will indicate areas that must be addressed to complete a valid data model.