Available when all coupling participants support restarts.
Specifies when restart points are generated.
Possible values depend on whether the analysis is step-based or iteration-based, as follows:
- Options available for step-based analyses:
Note: Step-based analyses are transient analyses or steady-state analyses that include one or more participants of type
AEDT
,CFX
,MAPDL
, orEXTERNALDATA
.LastStep
(default value)System Coupling generates a restart point only for the last coupling step completed.
EveryStep
System Coupling generates a restart point at the end of every coupling step.
StepInterval
System Coupling generates a restart point at the end of coupling steps at the interval specified by the OutputFrequency setting.
- Options available for iteration-based analyses:
Note: Iteration-based analyses are steady-state analyses that do not include any participants of type
AEDT
,CFX
,MAPDL
, orEXTERNALDATA
.LastIteration
(default value)System Coupling generates a restart point only for the last coupling iteration completed.
EveryIteration
System Coupling generates a restart point at the end of every coupling iteration.
IterationInterval
System Coupling generates a restart point at the end of coupling iteration at the interval specified by the OutputFrequency setting.
For more information on step-based versus iteration-based analyses, see System Coupling Analysis Types in the System Coupling User's Guide.
Tip: Shown in the GUI as the Output Control | Option setting.