Consolidating Split Edges

  1. Select the Split Edges tool.
    The tool will automatically detect and highlight split edges, as shown in the image above.
  2. Select the split edge(s) you want to change:

    • Use the Select Problem tool guide to select highlighted areas that you want to change. The cursor will change to a hand when you move the mouse over a problem area. This tool guide is active by default. When a single edge split is selected, the coincident edges are merged.

    • Use the Select Geometry tool guide to select edges that were not automatically detected.

  3. (Optional) Use the Navigation tools to view each problem one at a time before you fix it.

    • Click Next or Previous to step through and highlight each identified problem.

    • Select Zoom to Fit if you want to automatically zoom in on the problem in the design area when you click Next or Previous.

  4. Click the Complete tool guide to fix selected edge split(s).
    • Problems that are highlighted when using the Navigation tools are fixed using the Complete tool guide.
    • You may box select several identified edge splits to be fixed in one operation.
    • Click in white space or click the Select Problem tool guide. No individual problem area is highlighted. Then the Complete tool guide will attempt to repair all identified edge splits.