Match standard size: Choose the hole series and set a tolerance for
comparing the hole geometry to standard hole dimensions. Simple holes within the
tolerance of a standard hole in the series will update to match that hole. See
Inserting a
standard hole for more detail on standard sizes.
Series: Choose one of the available Hole Standards from the
Series drop-down menu
Tolerance: Enter a tolerance value. Any Standard Holes in the
selected Series that are within the tolerance will be identified.
Allholes: With Match standard size checked Off, this option will find all
holes.
Through-holes: Only finds through holes.
Blindholes: Only finds blind holes.
Countersunk: Finds holes with countersink geometry.
Counterbore: Finds holes with counterbore geometry.
