Tangency Tool Guides and Options
Tangency Tool Guides
The following tool guides help step you through the process. Use the Tab key to cycle through them. As soon as the tool guide switches, the cursor may change to reflect the active guide.
Select Problem | The Select Problem tool guide is active by default. This tool guide allows you to select problem areas that are automatically found by the tool. |
Select Geometry | The Select Geometry tool guide allows you to select edges between faces that were not automatically found. Hold Ctrl to select multiple edges or box select in the design area. When you hover over an edge, you can see the two faces that would be affected by the change. |
Exclude Problem | The Exclude Problem tool guide allows you to exclude areas from selection and fixing. |
Complete | The Complete tool guide makes all highlighted edges tangent. |
Tangency Tool Options
The following tool option is available:
Maximum angle | The maximum angle to detect for tangency. For best results, keep this angle as small as possible. |