Drawing a Point
- Click Point in the Sketch group on the Design tab.
- Select a mode:
- If a sketch plane is not active, press Esc to sketch in 3D or click an object or objects in the Design window to make a sketch plane.
- If a sketch plane is active, click 3D Mode in the Mode group or press D to sketch in 3D.
- (Optional) Dimension the point relative to another object.
- Click to place a point:
On a face or surface: click a location on a face or surface.
On an edge or curve: click a location on the edge or curve.
On the midpoint of a straight line between two points in 2D: hold Alt and Shift and select two points, then click the temporary point at the midpoint.
On the midpoint of a straight line between two points in 3D: select two points.
Projected onto a face: select a point and then a face to project onto.
Projected onto an edge: select a point and then an edge to project onto.
In a UV direction within a face/surface: select an existing point on a face and then a location on the face to specify the direction.
Along an edge from an existing point on the edge: select a point on an edge and a location along the edge.
You can also use temporary points, axes, and planes to help you create points. When hovering over, or selecting on a point with the Select tool, the X, Y, Z locations of the point display in the status bar.