Offset Curve Tool Options

The following options are available in the Offset Line tool:

Offset both ways	Create two offset lines on either side of the selected line.
Close with corner	Close intersecting offset lines with a corner.
Close with arc	Close intersecting offset edges with an arc.
Close naturally	Close intersecting offset edges with a curve.
Automatically create constraints	Select this sketch option to automatically generate constraints based on shapes created or on snaps. This option is enabled by default.
Snap to grid	Select this sketch option to turn snapping on or off while sketching. The cursor will snap to the minor grid spacing increment while you sketch. The defaults are 1mm for Metric and 0.125in for Imperial units.
Snap to angle	Select this sketch option to turn angle snapping on or off while sketching. The cursor will snap to the angular snap increment while you sketch. The default is 15 degrees.
Fit Curves	Disable this mesh option if you do not want the system to fit curves through the points.
Tolerance	This mesh option determines how many points will be found, which also determines how many curves will be created. The smaller the tolerance, the more points will be found and the curves will be generated.
Auto-merge	When this mesh option is enabled, the system will merge lines and arcs to form splines. Splines are displayed pink.