If enabled, a copy of the selected entities will be created in the new location.

To add the newly created copies of entities to a new part, click the IncrementParts icon. A window will open with the list of the parts of the selected entities. If a part is selected, the new entities will be placed in a new part named [old_part_name]_0. For multiple copies, each copy will be placed in a separate part, for example, GEOM_1, GEOM_2, GEOM_3, etc.

Select six points in all. The first three points will be used as the reference for the entity to be transformed. The second set of three points is used to define the transformation. The result will match the first points of both sets, and the direction from the first to the second point, and the plane defined by the third point.

Select two curves. The first curve is used as a reference for the entity to be transformed. The second curve is used to define the transformation. The result will match the beginning (parameter = 0) of both curves, the direction from parameter 0 to 0.5, and the plane defined by the end (parameter 1) of the curves. A curve used to define the transformation can be included in the entities selected to be transformed.

Select two local coordinate systems. Click Apply.

The result will match the origin and the axes of the first to the second LCS.