This option can be used to assign thickness values to a surface as well as to display the assigned thickness values of a surface.
- Surface
Select a surface or set of surfaces. If the thickness values are assigned, they will be displayed. If multiple surfaces are selected, the only value that will be displayed is the value of the first surface selected.
- Order
Defines the number of control points along a surface. For example, an order of 4 x 4 control points means that there are 16 total control points along the surface. For a 4-sided surface, along each edge there would be 4 interpolation points creating a thickness interpolation surface between the 16 total points along the edges.
- Corner/Middle Points
The thickness values for each specific control point.
Note: There is currently no convenient way to visualize specific control points, so the best way to see the results is by right-clicking Geometry > Surfaces > Show Surface Thickness in the Display Tree. The thickness values can then be assigned in an iterative method.