[1] Abani, N. and Reitz, R. D., "Unsteady Turbulent Round Jets and Vortex Motion," Physics of Fluids, 19(1): 125102, 2007, doi:10.1063/1.2821910..

[2] Abani, N., Kokjohn, S., Park, S. W., Bergin, M., Munnannur, A., Ning, W., Sun, Y., and Reitz, R. D., "An Improved Spray Model for Reducing Numerical Parameter Dependencies in Diesel Engine CFD Simulations, SAE Technical Paper 2008-01-0970," SAE Technical Paper Series, 2008..

[3] Amsden, A. A., J. D. Ramshaw, L. D. Cloutman, and P. J. O'Rourke, "Extensions to the KIVA Computer Program," Los Alamos National Laboratory Report LA-10534-MS, 1985..

[4] Amsden, A. A., P. J. O'Rourke, and T. D. Butler, "KIVA-II: A Computer Program for Chemically Reactive Flows with Sprays," Los Alamos National Laboratory Report LA-11560-MS, Los Alamos National Laboratory, 1989..

[5] Amsden, A. A., "KIVA-3V: A Block-structured KIVA Program for Engines with Vertical or Canted Valves," Los Alamos National Laboratory Report LA-13313-MS, Los Alamos National Laboratory, 1997..

[6] ANSYS Fluent, Release 19.2, User's Guide, 2018..

[7] Appel, J., H. Bockhorn, and M. Frenklach, Combustion and Flame, 121:122-136, 2000..

[8] Artelt, C., H.-J. Schmid, and W. Peukert, "On the relevance of accounting for the evolution of the fractal dimension in aerosol process simulations," Journal of Aerosol Science, 34: 511-534, 2003..

[9] Bai, C. and A. Gosman, "Mathematical Modeling of Wall Films Formed by Impinging Sprays, SAE Technical Paper 960626," SAE Technical Paper Series 1996..

[10] Barlow, B. S., Karpetis, A. N., Frank, J. H., Chen, J.-Y., "Scalar Profiles and NO Formation in Laminar Opposed-Flow Partially Premixed Methane/Air Flames," Combustion and Flame, Vol. 127 (3), pp. 2102-2118, 2001..

[11] Beale, J.C., R.D. Reitz, "Modeling spray atomization with the Kelvin-Helmholtz / Rayleigh-Taylor hybrid model," Atomization and Sprays, 9, 623-650, 1999..

[12] Bellman, R. and Pennington, R. H., "Effects of Surface Tension and Viscosity on Taylor Instability", Quarterly of Applied Mathematics, 12(2): 151-162, 1954..

[13] Brackbill, J. U. , Kothe, D. B., Zemach, C. "A Continuum Method for Modeling Surface Tension," Journal of Computational Physics, 100, 335-354, 1992.

[14] Cebeci, T., and P. Bradshaw. Momentum Transfer in Boundary Layers, Hemisphere Publishing Corporation, New York. 1977..

[15] Chemkin, Reaction Design: San Diego, 2008..

[16] CHEMKIN Theory Manual, Reaction Design, San Diego, CA, USA, 2009..

[17] Chou, C.-P., P. Ho, and E. Meeks, 30th International Symposium on Combustion, Work-In-Progress Poster Section, 2F1-22, July 25-30, 2004..

[18] Clavin, P., and Williams, F.A., Journal of Fluid Mechanics, 90: 489-604, 1979..

[19] Crowe C., Sommerfeld M., and Tsuji Y., Multiphase Flows with Droplets and Particles, CRC Press, Boca Raton, ISBN-10: 0849394694, 1998..

[20] Damköhler, G., Z. Elektrochem. Angew. Phys. Chem., 46: 601, 1940..

[21] Damköhler, G., Z., "Development of Ignition and Combustion Model for Spark-Ignition Engines, SAE Technical Paper 2000-01-2809," SAE Technical Paper Series, 2000..

[22] Duclos, J-M, and Colin, O., “Arc and Kernel Tracking Ignition Model for 3D Spark-Ignition Engine Calculations,” The fifth International Symposium on Diagnostics and Modeling of Combustion in Internal Combustion Engines (COMODIA 2001), July1-4, 2001, Nagoya..

[23] Fan, L., and Reitz, R. D., “Development of Ignition and Combustion Model for Spark-Ignition Engines,” SAE Paper 2000-01-2809, 2000..

[24] Frenklach, M. and Wang, H., in Soot Formation in Combustion: Mechanisms and Models, H. Bockhorn (Ed.), Springer-Verlag, pp. 165-192, 1994..

[25] Frenklach, M., and S.J. Harris, Journal of Colloid and Interface Science, 118:252-261, 1987..

[26] Ge, H. and Zhao, P., “A Comprehensive Ignition System Model for Spark Ignition Engines,” Proc. of ASME 2018, ICEF 2018-9574..

[27] Gülder, O. L., "Correlations of Laminar Combustion Data for Alternative S.I. Engine Fuels, SAE Technical Paper 841000," SAE Technical Paper Series, 1984..

[28] Gülder, O. L. "Correlations of Laminar Combustion Data for Alternative S.I. Engine Fuels, SAE Paper 841000," SAE Technical Paper Series, 841000, 1984.

[29] Han, Z., Z. Xu, and N. Trigui, "Spray/Wall Interaction Models for Multidimensional Engine Simulation," International Journal of Engine Research, 2000. 1:1..

[30] Han, Z., and R. D. Reitz, "Turbulence Modeling of Internal Combustion Engines Using RNG k - ε Models," Combustion Science and Technology, 106, pp. 267-295, 1995..

[31] Han, Z., and R. D. Reitz, "A Temperature Wall Function Formulation for Variable-density Turbulence Flows with Application to Engine Convective Heat Transfer Modeling," International Journal of Heat Mass Transfer, 40, 3, pp. 613-625, 1997..

[32] Haworth, D. C., "A Review of Turbulent Combustion Modeling for Multidimensional In-Cylinder CFD, SAE Technical Paper 2005-01-0993," SAE Technical Paper Series, 2005..

[33] Henry’s Law Constants, https://www.henrys-law.org/henry/.

[34] Herweg, R. and Maly, R. R., "A Fundamental Model for Flame Kernel Formation in S.I. Engines, SAE Technical Paper 922243," SAE Technical Paper Series, 1992..

[35] Heywood, J. B., Internal Combustion Engine Fundamentals, McGraw-Hill, 1988..

[36] Hiroyasu, H. and Kadota, T., "Models for Combustion and Formation of Nitric Oxide and Soot in DI Diesel Engines, SAE Technical Paper 760129," SAE Technical Paper Series, 1976..

[37] Hirt, C. W., A. A. Amsden, and J. L. Cook, "An arbitrary Lagrangian-Eulerian computing method for all flow speeds," Journal of Computational Physics, 14, 227-253, 1974..

[38] Hirt. C. W. and B. D. Nichols, "Volume-of-Fluid (VOF) Method for the Dynamics of Free Boundaries, Journal of Computational Physics, 39, 201-225, 1981..

[39] Hou, S., and Schmidt, D. P., Adaptive Collision Meshing and Satellite Droplet Formation in Spray Simulations," International Journal of Multiphase Flow, 32: 935-956, doi:10.1016/j.ijmultiphaseflow.2006.02.013, 2006..

[40] Kazakov, A., and Frenklach, M., "Dynamic Modeling of Soot Particle Coagulation and Aggregation: Implementation with the Method of Moments and Application to High-Pressure Laminar Premixed Flames", Combustion and Flame, 114:484-501, 1998..

[41] Kim, J., Anderson, R. W., Spark Anemometry of Bulk Gas Velocity at the Plug Gap of a Firing Engine. SAE Technical Paper 952459, 1995. .

[42] Ko, G.H., and Ryou, H. S., "Modeling of droplet collision-induced breakup process," International Journal of Multiphase Flow," 31.6:723-738, 2005..

[43] Koch, W., and Friedlander, S.K., "The Effect of Particle Coalescence on the Surface Area of a Coagulating Aerosol", Journal of Colloid and Interface Science, 140(2):419-427, 1990..

[44] Kong, D., R.K. Eckhoff, and F. Alfert, "Auto-ignition of CH4/air, C3H8/air, CH4/C3H8/air and CH4/CO2/air using a 1 l ignition bomb," Journal of Hazardous Materials, 40, pp. 69 - 84, 1995..

[45] Kong, S.-C. and Reitz, R. D., "Use of Detailed Chemical Kinetics to Study HCCI Engine Combustion With Consideration of Turbulent Mixing Effects," Transactions of the American Society of Mechanical Engineers, 124, pp. 702-707, 2002..

[46] Levich, V. G., Physicochemical Hydrodynamics, ed. N.R. Amundson, Englewood Cliffs, N.J. : Prentice-Hall, 1962.

[47] Leonard, B. P., The ULTIMATE Conservative Difference Scheme Applied to Unsteady One-Dimensional Advection, Computer Methods in Applied Mechanics and Engineering, 88 (1), pp. 17–74, 1991..

[48] Liang, L., Stevens, J.G., Farrell, J.T. "A Dynamic Adaptive Chemistry Scheme for Reactive Flow Computations." Proceedings of the Combustion Institute, 32, pp. 527-534, 2009..

[49] Liang, L., Stevens, J.G., Ram an, S., Farrell, J.T., "The Use of Dynamic Adaptive Chemistry in Combustion Simulation of Gasoline Surrogate Fuels." Combustion and Flame, 156:7, 1493-1502, 2009..

[50] Liang, L., Stevens, J.G., Farrell, J.T. "A dynamic multi-zone partitioning scheme for solving detailed chemical kinetics in reactive flow computations," Combustion Science and Technology, 181:11, 1345-1371, 2009..

[51] Liang, L. and Reitz, R. D., "Spark Ignition Engine Combustion Modeling Using a Level Set Method with Detailed Chemistry, SAE TEchnical Paper 2006-01-0243," SAE Technical Paper Series, 2006..

[52] Liang, L., Reitz, R.D., Iyer, C.O. and Yi, J., "Modeling Knock in Spark-Ignition Engines Using a G-equation Combustion Model Incorporating Detailed Chemical Kinetics, SAE Technical Paper 2007-01-0165," SAE Technical Paper Series, 2007..

[53] Lifante, C. and Frank, T., “Investigation of Higher Order Pressure Fluctuations and Its Influence on Ship Stern, Taking into Account Cavitation at Propeller Blades”, Ansys Report TR-08-04, Germany, Dec 2008.

[54] Lu, T. and C.K. Law, "A directed relation graph method for mechanism reduction," Proceedings of the Combustion Institute, 30: 1333-1341, 2005..

[55] Marr, J.A., PhD. Thesis, Dept. of Chemical Engineering, MIT, 1993..

[56] Metghalchi, M, and Keck, J. C. "Burning Velocities of Mixtures of Air with Methanol, Isooctane, and Indolene at High Pressures and Temperatures," Combustion and Flame, 48: 191-210, 1982..

[57] Metghalchi, M., and Keck, J. C., "Burning Velocities of Methanol, Ethanol and iso-Octane-Air Mixtures", 19th Symposium (International) on Combustion/ The Combustion Institute, p. 275, 1983..

[58] Munnannur, A. and Reitz, R.D., "A Comprehensive Collision Model for Multi-Dimensional Engine Spray Computations," Atomization and Sprays, 19:7 597-619, doi:10.1615/AtomizSpr.v19.i7, 2009..

[59] Munnannur, A., "Droplet Collision Modeling in Multi-Dimensional Engine Spray Computations," Ph.D. Thesis, Mechanical Engineering Department, University of Wisconsin-Madison, 2007..

[60] Naber, J., and R. D. Reitz, "Modeling Engine Spray/Wall Impingement, SAE Technical Paper 880107," SAE Technical Paper Series, 1988..

[61] Nagle, J., and Strickland-Constable, R. F., "Oxidation of Carbon Between 1000-2000 °C," Proceedings of the Fifth Carbon Conference, Vol. 1, Pergamon, New York, pp. 154-164, 1962..

[62] Namazian, M., and J. B. Heywood, "Flow in the Piston-Cylinder-Ring Crevices of a Spark-Ignition Engine: Effect on Hydrocarbon Emissions, Efficiency and Power, SAE Technical Paper 820088," SAE Technical Paper Series, 1982..

[63] O'Rourke, P.J. and A.A. Amsden, "A Particle Numerical Model For Wall Film Dynamics in Port-Injected Engines, SAE Technical Paper 961961," SAE Technical Paper Series, 1996..

[64] O'Rourke, P.J. and A.A. Amsden, A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model, SAE Technical Paper 2000-01-0271," SAE Technical Paper Series, 2000..

[65] O'Rourke, P. J., and A. A. Amsden, "The TAB Method for Numerical Simulations of Spray Droplet Breakup, SAE Technical Paper 872089," SAE Technical Paper Series, 1987..

[66] Osterland, S., Gűnther, L., Weber, J., "Experiments and Computational Fluid Dynamics on Vapor and Gas Cavitation for Oil Hydraulics," Chemical Engineering Technology, Vol. 46 (1), pp. 147-157, 2022, doi: 10.1002/ceat.202200465.

[67] Pashley, N., Stone, R., Roberts, G., “Ignition System Measurement Techniques and Correlations for Breakdown and Arc Voltage and Currents,” SAE Technical Paper 2000-01-0245, 2000..

[68] Patankar, S.V., Numerical Heat Transfer and Fluid Flow, Hemisphere Publishing Corporation: Washington D. C., 1980..

[69] Peters, N., Turbulent Combustion, Cambridge University Press: Cambridge, UK, 2000..

[70] Pracht, W. E., "Calculating three-dimensional fluid flows at all speeds with an Eulerian-Lagrangian computing mesh," Journal of Computational Physics, 17:2 132-159, 1975..

[71] Promraning, E., Rutland, C. J. "Dynamic One-equation Nonviscosity Large-eddy Simulation Model," AIAA J., 40:4 689-701, 2002..

[72] Puduppakkam, K., Modak, Abhijit U., Naik, Chitralkumar V., Meeks, Ellen, Computational Fluid Dynamics (CFD) Method Including a Kinetics-Based Model for Species Response in a Flame Front, U.S. Patent pending, January 18, 2023..

[73] Ra, Y., Reitz, R.D., "The application of a multi-component vaporization model to gasoline direct injection engines," International Journal of Engine Research, 4, 193-218, 2003..

[74] Ra, Y., Reitz, R. D., "A vaporization model for discrete multi-component fuel sprays, International Journal of Multiphase Flow," 35, 101-117, doi:10.1016/j.ijmultiphaseflow.2008.10.006, 2009..

[75] Rakopoulos, C. D., Kosmadakis, G. M., Patriotis, E. G., "Critical Evaluation of Current Heat Transfer Models Used in CFD In-Cylinder Engine Simulations and Establishment of a Comprehensive Wall-Function Formulation," Applied Energy, 81 1612-1630, 2010. Doi: 10.1016/j.apenergy.2009.09.029..

[76] Reid, R.C., J.M. Prausnitz, and B.E. Poling, The Properties of Gases and Liquids, 4th Edition, McGraw-Hill, New York, 1987..

[77] Reitz, R. D., "Modeling Atomization Processes in High-Pressure Vaporizing Sprays", Atomization and Sprays, 3: 309-337, 1987..

[78] Reitz, R. D. and Diwakar, R., "Effect of Drop Breakup on Fuel Sprays, SAE Technical Paper 860469," SAE Technical Paper Series, 1986..

[79] Rhodes, D. B., and Keck, J., "Laminar Burning Speed Measurements of Indolene-Air-Diluent Mixtures at High Pressures and Temperatures," SAE Technical Paper 950047, SAE Tehcnical Paper Series, 1985..

[80] Rudman. M/, "Volume-Tracking Methods for Interfacial Flow Calculations," International Journal of Numerical Methods in Fluids, 24, 671-691, 1997..

[81] Rutland, C. J., "Large-eddy Simulations for Internal Combustion Engines – A Review," International Journal of Engine Research, 12, pp. 1-31, 2011..

[82] Sander, R., Acree, W. E., De Visscher, A., Schwartz, S. E., Wallington, T. J., Henry’s law constants (IUPAC Recommendations 2021), Pure and Applied Chemistry, Vol. 94 (1), pp. 71-85, doi: 10.1515/pac-2020-0302.

[83] Scarcelli, R., Zhang A., Wallner, T., Som S., Huang, J., Wijeyakulasuriya, S., Mao, Y., Zhu X., Lee, S-Y, “Development of a Hybrid Lagrangian-Eulerian Model to Describe Spark-Ignition Processes at Engine-like Turbulent Flow Conditions,” J. Eng. Gas Turbines Power. Sep 2019, 141(9): 091009..

[84] Schmidt, D. P., I. Nouar, P. K. Senecal, C. J. Rutland, J. K. Martin, R. D. Reitz, and J. A. Hoffman, "Pressure-Swirl Atomization in the Near Field, SAE Technical Paper 1999-01-0496," SAE Technical Paper Series, 1999..

[85] Singh, S., Liang, L., and Reitz, R. D., "Development of a flame propagation model for dual-fuel partially premixed compression ignition engines," Journal of Engine Research, 7, pp. 65-75, 2006..

[86] Squire, H. B., "Investigation of the Instability of a Moving Liquid Film," British Journal of Applied Physics, 4, p. 167, 1953..

[87] Schmidt, D. P. and Rutland, C. J., "A New Droplet Collision Algorithm," Journal of Computational Physics, 164:62-80, doi:10.1006/jcph.2000.6568, 2000..

[88] Sirignano, W. A., "Fuel droplet vaporization and spray combustion," Progress in Energy and Combustion Science, 9, 291-322, 1983..

[89] Smagorinsky, J., "General Circulation Experiments with the Primitive Equations," Mon. Weather Rev., vol. 99, no. 3, pp. 99-164, 1963..

[90] Su, T. F., Patterson, M. A., Reitz, R. D., and Farrell P. V., "Experimental and Numerical Studies of High Pressure Multiple Injection Sprays, SAE Technical Paper 960861," SAE Technical Paper Series, 1996..

[91] Sun, Y., Reitz, R. D., "Modeling Low-Pressure Injections in Diesel HCCI Engines," ILASS Americas, 20th Annual Conference on Liquid Atomization and Spray Systems, Chicago, 2007..

[92] Takeda, K., Sugimoto, T., Tsuchiya, T., Ogawa, M., Ueda, S., and Yoneshige, K., "Slit Nozzle Injector for a New Concept of Direct Injection SI Gasoline Engine, SAE Technical Paper 2000-01-1902," SAE Technical Paper Series, 2000..

[93] Tan, Z., "Multi-Dimensional Modeling of Ignition and Combustion in Premixed and DIS/CI (Direct Injection Spark/Compression Ignition) Engines." Ph.D. Thesis, University of Wisconsin-Madison, 2003..

[94] Tan, Z.; Reitz, R.D., "An Ignition and Combustion Model for Spark Ignition Engine Multi-dimensional Modeling," Combustion and Flame, 145, pp. 1-15, 2006..

[95] Thompson, P. A., Compressible-fluid Dynamics, McGraw-Hill: New York, 1972..

[96] Tsang, C.-W., Trujillo, M.F., Rutland, C. J., "Large-eddy Simulation of Shear Flows and High-speed Vaporizing Liquid Fuel Sprays," Computational Fluids, 105, pp. 262-279, 2014..

[97] Trujillo, M.F., O'Rourke, P., Torres, D., "Generalizing the Thermodynamics State Relationships in KIVA-3V, LA-13981," Los Alamos National Laboratory," 2002..

[98] Tsang, C.-W., Wang, Y., Wang, C., Shelburn, A., Liang, L., Puduppakkam, K., Modak, A., Naik, C., Meek, E., Rutland, C., "Evaluation and Validation of Large-Eddy-Simulation (LES) for Gas Jet and Sprays, SAE Technical Paper 2018-01-0844," SAE Technical Paper Series, 2017..

[99] Ubbink, O., "Numerical Prediction of Two Fluid Systems with Sharp Interfaces,” Ph.D. Thesis, Imperial College London, 1997..

[100] Vishwanathan, G., and Reitz, R. D., "Numerical Predictions of Diesel Flame Lift-Off Length and Soot Distributions Under Low Temperature Combustion Conditions, SAE Technical Paper 2008-01-1331," SAE Technical Paper Series, 2008..

[101] Wahiduzzaman, S., and C. R. Ferguson, "Convective Heat Transfer from a Decaying Swirling Flow within a Cylinder," 8th International Heat Transfer Conference, paper #86-IHTC-253, August 1986..

[102] Wang, Y., Ge, H.-W., and Reitz, R.D., "Validation of Mesh- and Timestep-Independent Spray Models for Multi-Dimensional Engine CFD Simulation, SAE Technical Paper 2010-01-0626," SAE Technical Paper Series, 2010..

[103] Wegener, J.L., et al., "A Criterion for Predicting Shear-driven Film Sebibliomisction at an Expanding Corner with Experimental Validation," 21st Institute for Liquid Atomization and Spray Systems Annual Conference, 2008..

[104] Wenzel, H., "Turbulent premixed combustion in the laminar flamelet and the thin reaction zones regime," Annual Research Briefs, Center for Turbulence Research, 1997: 237-252, 1997..

[105] Yakhot, V., and S. A. Orszag, "Renormalization Group Analysis of Turbulence: I. Basic Theory," Journal of Scientific Computing, 1:3, 1986..

[106] Yang, X., Takamoto, Y., Okajima, A., Obokata, T. and Long, W., "Comparison of Computed and Measured High-Pressure Conical Diesel Sprays, SAE Technical Paper 2000-01-0951," SAE Technical Paper Series, 2000..

[107] Zwart, P. J., Gerber, A. G., and Belamr, iT.. "A Two-Phase Flow Model for Predicting Cavitation Dynamics", In Fifth International Conference on Multiphase Flow, Yokohama, Japan, 2004...