Another aspect of Ansys Fluent's web interface is the ability to interact with and change your Fluent simulation settings within the web interface.
Note: Ansys Fluent's web interface only supports features that are available under Pro licensing (see Program Capabilities), such as access to a reduced set of Fluent solver capabilities allowing the solution of incompressible and compressible steady-state and transient, single-phase, turbulent, non-reacting flows, and heat transfer.
Note: While calculations are progressing, you are intentionally not allowed to make changes to your simulation settings and/or perform certain actions, such as:
Reading case/data files.
Starting another calculation.
Editing model settings.
Editing solution and/or initialization settings, such as the number of iterations, timesteps, etc.
The following sections describe operations available for setting up your simulation in Ansys Fluent's web interface.
Various means of setting up the turbomachinery models for your simulation are available
Setup → Turbo Model
From here, you can view and make changes to turbomachinery model settings. The available settings are similar to those found in the standard Fluent solver. For more detailed information about them, see Modeling Turbomachinery Flows.