Specifying a Torsional Spring
- Select Spring from the dropdown menu of the Structural tool in the Physics group of the Simulation tab, or by selecting the Spring tool in the Structural condition HUD.
-
Define the spring by selecting two faces or a face and a point. Click or Alt-click to select
your second location.
If your model contains Named Selections, you can click Advanced filters, select Link named selections, and choose one from the list.
- Select a Torsional spring type. Torsional springs generate a force that rotates about the axis.
- Enter a Stiffness value.
- Enter the spring Length, defined as the distance between the center of the two selected faces or between the center of the selected face and a point.
-
Additionally, in the
Refine stage, you can optionally select a Preload
type.
- Select Torque to define the preload as a force in the opposite direction, then enter a non-zero value for the torque.
- Select Rotation to define the preload as a rotational displacement, then enter the displacement as a non-zero value.
- Click Accept to complete the setup.