Assign Beam Tool Options

The following options are available:

	The filter narrows down the list of beam profiles. You can filter based on code (AISC, EUROCODE) or beam type (I, Channel, L, etc.).
Source	The code of practice defining the beam profile and material properties.
Profile type	The general shape profile of the cross section (for example, "L" for angle sections).
Family	The family subclass of the section that fits within the profile (for example, Equal angle, Unequal angle).
Size classification	The declared size as defined by the code of practice. The actual dimensions may vary.
Material	The material used.
Grade	The grade of material used, as defined by the code of practice.
Section depth	The measured depth of the section.
Section width	The measure width of the section.
Web thickness	The thickness of the beam web.
Flange thickness	The thickness of the beam flanges.
Kdet	The code specific dimension Kdet.
K1	The code specific dimension K1.
Cross-section area	The cross-sectional area.
Ixx	The second moment of area about the sections primary (xx) axis of bending.
Iyy	The second moment of area about the sections secondary (yy) axis of bending.