101
Menter, F.R., Langtry, R.B., Likki, S.R., Suzen, Y.B., Huang, P.G., and Völker, S.,
"A Correlation based Transition Model using Local Variables Part 1- Model Formulation",
ASME-GT2004-53452, ASME TURBO EXPO 2004, Vienna, Austria.
102
Langtry, R.B., Menter, F.R., Likki, S.R., Suzen, Y.B., Huang, P.G., and Völker, S.,
"A Correlation based Transition Model using Local Variables Part 2 - Test Cases and Industrial Applications",
ASME-GT2004-53454, ASME TURBO EXPO 2004, Vienna, Austria.
103
Langtry, R.B., Menter, F.R.,
"Transition Modeling for General CFD Applications in Aeronautics",
AIAA paper 2005-522, 2005.
104
Mayle, R.E.,
"The Role of Laminar-Turbulent Transition in Gas Turbine Engines",
ASME Journal of Turbomachinery, Vol. 113, pp. 509-537, 1991.
105
R. Schmehl,
"Advanced Modelling of Droplet Deformation and Breakup for CFD Analysis of Mixture Preparation",
ILASS-Europe 2002, 2002.
107
F.X. Tanner,
"Liquid Jet Atomization and Droplet Breakup Modeling of Non-Evaporating Diesel Fuel Sprays",
SAE Technical Paper Series, 970050, 1997.
108
B. Liu, D. Mather and R.D. Reitz,
"Effects of Drop Drag and Breakup on Fuel Sprays",
SAE Technical Paper 930072, 1993.
109
L.P. Hsiang and G.M. Faeth,
"Near-Limit Drop Deformation and Secondary Breakup",
International Journal of Multiphase Flow, Vol. 18, No. 5, pp. 635-652, 1992.
110
S. C. Kuensberg, S.-C., Kong and R. D. Reitz,
"Modelling the Effects of Injector Nozzle Geometry on Diesel Sprays",
SAE Paper 1999-01-0912, 1999.
111
H. Hiroyasu and T. Kadota,
"Fuel droplet size distribution in diesel combustion chamber",
SAE Technical Paper, 740715, 1974.
112
R. Schmehl, G. Maier and S. Wittig,
"CFD Analysis of Fuel Atomization, Secondary Droplet Breakup and Spray Dispersion in the Premix Duct of a LPP Combustor",
Proc. of 8th Int. Conf. on Liquid Atomization and Spray Systems, Pasadena, CA, USA, 2000.
113
Schlichting, H., and Gersten, K.,
"Grenzschicht-Theorie".
9. Auflage, Springer-Verlag Berlin, Heidelberg, New York, 1997
114
W.H. Nurick,
"Orifice Cavitation and Its Effect on Spray Mixing",
Journal of Fluids Engineering, Vol. 98, pp. 681-687, 1976.
115
R.D. Reitz and R. Diwakar,
"Structure of High-Pressure Fuel Sprays",
SAE Technical Paper, 870598, 1987.
116
P.J.O'Rourke and A.A. Amsden,
"The TAB Method for Numerical Calculation of Spray Droplet Breakup",
SAE Technical Paper 872089, 1987.
117
M. Pilch and C.A. Erdman,
"Use of Breakup Time Data and Velocity History Data to Predict the Maximum Size of Stable Fragments for Acceleration-Induced Breakup of a Liquid Drop",
Int. J. Multiphase Flow, Vol. 13, No. 6, pp. 741-757, 1987.