You access the Termination Control details view in CFX-Pre by clicking Insert > Configurations > Termination Control or by right-clicking Simulation Control in the Outline tree view and selecting Insert > Termination Control.
Details of the Termination Control tab:
- Control Conditions
A list displaying the available termination control conditions. Click Add new item
to add a new termination control condition. To
change its settings, the termination control condition must be highlighted.
You can highlight a condition by selecting it from the displayed list.
Click Delete 
to delete a highlighted termination control condition.- Control Condition: Options
The options for termination control are either Max. Configuration Steps or Solver Interrupt Conditions. The former setting is used to terminate a simulations after a selected configuration has been executed the prescribed number of times. The latter setting is used to terminate a simulation whenever the named CFX-Solver interrupt conditions for the selected configurations have been satisfied. Note that the latter option is only valid if CFX-Solver interrupt conditions have been defined. For details, see Interrupt Control.
- Control Condition: Configuration Name
Choose the configuration for which the termination control is to be applied.
- Control Condition: Number of Steps
This setting is used to set to the maximum number of times the specified configuration is to be executed in the course of the simulation.
- Control Condition: Condition Name(s)
This setting is used to identify the names of the solver interrupt condition for the specified configuration to be used to terminate the simulation.