VMR027-6B

VMR027-6B
3D - Triaxial Displacement Secondary Creep

Test Description

A block of length, height, and width L is constrained on the left face in the X-direction and constrained on the bottom face in the Y-direction. The model is displaced in all three directions by a given quantity.

Geometic Properties

Material Properties

L = 100 mm

Boundary Conditions

Left Face: u_x = 0, Right Face: u_x = 0.3

Bottom Face: u_y = 0, Top Face: u_y = 0.2

Front Face: u_z = 0, Back Face: u_z = 0.1

E = 200 x 10³ N/mm²

ν = 0.3

Creep Law: ε = Aσⁿt

A = 3.125 x 10^-14 per hour ( σ in N/mm² )

n = 5

No applied forces

Results

Results are tabulated and displayed as in the NAFEMS manual.


             |   ANSYS   |   RATIO  |         INPUT         |
  
  SOLID185
  ISOCRX       1007.950       1.0002     vmr027-cr6b-185
  ANICRX       1007.950       1.0002     vmr027-cr6b-185
  SOLID186
  ISOCRX       1007.950       1.0002     vmr027-cr6b-186
  ANICRX       1007.950       1.0002     vmr027-cr6b-186
  SOLID187
  ISOCRX       1007.950       1.0002     vmr027-cr6b-187
  ANICRX       1007.950       1.0002     vmr027-cr6b-187
  
 ----------------------------------------------------------------

vmr027-cr6b-185.dat

vmr027-cr6b-186.dat

vmr027-cr6b-187.dat