/COM,ANSYS MEDIA REL. 2024R2 (05/10/2024) REF. VERIF. MANUAL: REL. 2024R2
/VERIFY,VMP09-T5-188
/TITLE,VMP09-T5-188, DEEP SIMPLY SUPPORTED BEAM
/COM,REFERENCE NAFEMS FVB TEST 5

/PREP7
N,1,0.0
N,2,1.0
N,3,2.0
N,4,3.0
N,5,4.0
N,6,5.0
N,7,6.0
N,8,7.0
N,9,8.0
N,10,9.0
N,11,10.0
ET,1,188
SECN,1
N,101,5.0,5.0
E,1,2,101
E,2,3,101
E,3,4,101
E,4,5,101
E,5,6,101
E,6,7,101
E,7,8,101
E,8,9,101
E,9,10,101
E,10,11,101
SECT,1,BEAM,RECT
SECD,2.0,2.0,4,4
MP,EX,1,200E9
MP,NUXY,1,0.3
MP,DENS,1,8000.0
D,1,UX
D,1,UY
D,1,UZ
D,1,ROTX
D,11,UY
D,11,UZ
FINISH
/out,scratch
/SOLU
ANTYPE,MODAL
MODOPT,LANB,9
MXPAND,9
LUMPM,ON
SOLVE
FINISH
/out
/POST1
*DIM,FREQ,ARRAY,9
*GET,FREQ(1,1),MODE,1,FREQ
*GET,FREQ(2,1),MODE,2,FREQ
*GET,FREQ(3,1),MODE,3,FREQ
*GET,FREQ(4,1),MODE,4,FREQ
*GET,FREQ(5,1),MODE,5,FREQ
*GET,FREQ(6,1),MODE,6,FREQ
*GET,FREQ(7,1),MODE,7,FREQ
*GET,FREQ(8,1),MODE,8,FREQ
*GET,FREQ(9,1),MODE,9,FREQ
R1=FREQ(1,1)/42.650
R2=FREQ(2,1)/42.650
R3=FREQ(3,1)/71.200
R4=FREQ(4,1)/125.000
R5=FREQ(5,1)/148.150
R6=FREQ(6,1)/148.150
R7=FREQ(7,1)/213.610
R8=FREQ(8,1)/283.470
R9=FREQ(9,1)/283.470
*DIM,VALUE,,9,2
*DIM,LABEL,CHAR,9
*DIM,RATIO,,9,1
LABEL(1) = 'FREQ 1','FREQ 2','FREQ 3','FREQ 4','FREQ 5','FREQ 6','FREQ 7','FREQ 8','FREQ 9'
*VFILL,VALUE(1,1),DATA,42.650,42.650,71.200,125.000,148.150,148.150,213.610,283.470,283.470
*VFILL,VALUE(1,2),DATA,FREQ(1,1),FREQ(2,1),FREQ(3,1),FREQ(4,1),FREQ(5,1),FREQ(6,1),FREQ(7,1),FREQ(8,1),FREQ(9,1)
*VFILL,RATIO(1,1),DATA,R1,R2,R3,R4,R5,R6,R7,R8,R9
/COM,
/COM
/COM,------------- VMP09-T5-188 RESULTS COMPARISON -------------
/COM,
/COM,         |   TARGET   |   Mechanical APDL   |   RATIO
/COM,
*VWRITE,LABEL(1),VALUE(1,1),VALUE(1,2),RATIO(1,1)
(1X,A8,'   ',F10.3,'  ',F15.3,'   ',1F8.3)
FINISH

/POST26
*DIM,LABEL1,CHAR,6
*DIM,LABEL3,CHAR,6
LABEL1(1) = ' MODE',' MODE',' MODE',' MODE',' MODE',' MODE'
LABEL3(1) = '1,2','3','4','5,6','7','8,9'
*DIM,VALUE1,,6,3
*VFILL,VALUE1(1,1),DATA,FREQ(2,1),FREQ(3,1),FREQ(4,1),FREQ(6,1),FREQ(7,1),FREQ(9,1)
*VFILL,VALUE1(1,2),DATA,R2,R3,R4,R6,R7,R9
*DIM,LABEL2,CHAR,6
*DIM,LABEL4,CHAR,6
LABEL2(1) = 'vmp09-t5','vmp09-t5','vmp09-t5','vmp09-t5','vmp09-t5','vmp09-t5'
LABEL4(1) = '-188','-188','-188','-188','-188','-188'

/OUT,vmp09-t5-188,vrt
/COM
/COM,------------------- VMP09-T5 RESULTS COMPARISON ---------------------
/COM,
/COM,            |   Mechanical APDL   |   RATIO  |         INPUT         |
/COM,
/COM, BEAM188
*VWRITE,LABEL1(1),LABEL3(1),VALUE1(1,1),VALUE1(1,2),LABEL2(1),LABEL4(1)
(1X,A5,A3,'      ',F13.3,'     ',F9.4,'        ',A8,A4)
/COM,
/COM,----------------------------------------------------------------
/OUT

FINISH
*LIST,vmp09-t5-188,vrt