vm-nr1677-2-4a-a Input Listing


/COM,ANSYS MEDIA REL. 2024R2 (05/10/2024) REF. VERIF. MANUAL: REL. 2024R2
/verify,vm-nr1677-2-4a-a
/title,vm-nr1677-2-4a-a,NRC piping benchmarks problems,Volume II,Problem 4a

/com, ***************************************************************************
/com, Reference: Piping benchmark problems,Dynamic analysis independant support
/com,            motion response spectrum method, P. Bezler, M. Subudhi and
/com,            M.Hartzman, NUREG/CR--1677-Vol.2, August 1985.
/com, 
/com, 
/com, Element used: Pipe16, Pipe18, Combin14 and Mass21
/com,
/com, Results comparsion:
/com, The following results are compared against NRC piping benchmark values
/com, 1. Frequencies obtained from modal solution.
/com, 2. Maximum nodal displacements and rotations obtained from spectrum solution.
/com, 3. Element forces/moments obtained from spectrum solution.
/com, 4. Reaction forces obtained from spectrum solution.
/com,
/com, *******************************************************************************

/out,scratch

/prep7

YoungModulus = 0.283e+8				! Young's Modulus
Nu = 0.3						! Minor Poisson's Ratio
ShearModulus = YoungModulus/(2*(1+Nu))	! Shear Modulus
K = 0.911e-5					! Thermal Expansion
maxm = 50						! No. of Modes Extracted

/com,
/com, Section Property
/com,******************

/com,
/com, Wall Thickness
/com,----------------

WTick_1 = 2.25
WTick_2 = 3.44
WTick_3 = 1.0
WTick_4 = 2.64
WTick_5 = 74.775

WTick_6 = 1.0
WTick_7 = 2.64
WTick_8 = 0.7180
WTick_9 = 1.62
WTick_10 = 46.035

WTick_11 = 0.7180
WTick_12 = 0.906
WTick_13 = 0.365

/com,
/com, Outer Diameter
/com,----------------

OD_1 = 32.25
OD_2 = 15.625
OD_3 = 10.75
OD_4 = 16.03
OD_5 = 160.3

OD_6 = 10.75
OD_7 = 16.03
OD_8 = 6.625
OD_9 = 9.87
OD_10 = 98.7

OD_11 = 6.625
OD_12 = 8.625
OD_13 = 10.75

/com,
/com, Bend Radius
/com,--------------

RADCUR_1 = 15.0
RADCUR_2 = 14.9
RADCUR_3 = 9.0
RADCUR_4 = 12.0
RADCUR_5 = 40.0
RADCUR_6 = 8.0

/com,-----------------------------------------------------------------------------------

/com,
/com, Element Types
/com,***************

et,1,pipe16
et,2,pipe16
et,3,pipe16
et,4,pipe16
et,5,pipe16
et,6,pipe16
et,7,pipe16
et,8,pipe16
et,9,pipe16
et,10,pipe16
et,11,pipe16
et,12,pipe16
et,13,pipe16

et,14,pipe18
et,15,pipe18
et,16,pipe18
et,17,pipe18
et,18,pipe18
et,19,pipe18
et,20,pipe18
et,21,pipe18
et,22,pipe18

et,23,mass21						! 3D Mass without rotatary inertia
keyopt,23,3,2
et,24,mass21
keyopt,24,3,2
et,25,mass21
keyopt,25,3,2
et,26,mass21
keyopt,26,3,2
et,27,mass21
keyopt,27,3,2
et,28,mass21
keyopt,28,3,2
et,29,mass21
keyopt,29,3,2
et,30,mass21
keyopt,30,3,2
et,31,mass21
keyopt,31,3,2
et,32,mass21
keyopt,32,3,2
et,33,mass21
keyopt,33,3,2
et,34,mass21
keyopt,34,3,2
et,35,mass21
keyopt,35,3,2
et,36,mass21
keyopt,36,3,2
et,37,mass21
keyopt,37,3,2
et,38,mass21
keyopt,38,3,2
et,39,mass21
keyopt,39,3,2
et,40,mass21
keyopt,40,3,2
et,41,mass21
keyopt,41,3,2
et,42,mass21
keyopt,42,3,2
et,43,mass21
keyopt,43,3,2
et,44,mass21
keyopt,44,3,2
et,45,mass21
keyopt,45,3,2
et,46,mass21
keyopt,46,3,2
et,47,mass21
keyopt,47,3,2
	    
et,48,combin14,,1						! Spring Elements Types and Real constants
keyopt,48,2,1						! X Degree of Freedom
et,49,combin14,,2
keyopt,49,2,2						! Y Degree of Freedom
et,50,combin14,,3
keyopt,50,2,3						! Z Degree of Freedom
et,51,combin14,,2
keyopt,51,2,2						! Y Degree of Freedom
et,52,combin14,,2
keyopt,52,2,2						! Y Degree of Freedom
et,53,combin14,,3
keyopt,53,2,3						! Z Degree of Freedom
et,54,combin14,,1
keyopt,54,2,1						! X Degree of Freedom
et,55,combin14,,2
keyopt,55,2,2						! Y Degree of Freedom
et,56,combin14,,1
keyopt,56,2,1						! X Degree of Freedom
et,57,combin14,,1
keyopt,57,2,1						! X Degree of Freedom
et,58,combin14,,2
keyopt,58,2,2						! Y Degree of Freedom
et,59,combin14,,1
keyopt,59,2,1						! X Degree of Freedom
et,60,combin14,,2
keyopt,60,2,2						! Y Degree of Freedom
et,61,combin14,,1
keyopt,61,2,1						! X Degree of Freedom
et,62,combin14,,2
keyopt,62,2,2						! Y Degree of Freedom
et,63,combin14,,2
keyopt,63,2,2						! Y Degree of Freedom
et,64,combin14,,1
keyopt,64,2,1						! X Degree of Freedom
et,65,combin14,,2
keyopt,65,2,2						! Y Degree of Freedom
et,66,combin14,,3
keyopt,66,2,3						! Z Degree of Freedom
et,67,combin14,,2
keyopt,67,2,2						! Y Degree of Freedom
et,68,combin14,,1
keyopt,68,2,1						! X Degree of Freedom
et,69,combin14,,1
keyopt,69,2,1						! X Degree of Freedom
et,70,combin14,,2
keyopt,70,2,2						! Y Degree of Freedom
et,71,combin14,,1
keyopt,71,2,1						! X Degree of Freedom
et,72,combin14,,2
keyopt,72,2,2						! Y Degree of Freedom
et,73,combin14,,1
keyopt,73,2,1						! X Degree of Freedom
et,74,combin14,,1
keyopt,74,2,1						! X Degree of Freedom
et,75,combin14,,3
keyopt,75,2,3						! Z Degree of Freedom
et,76,combin14,,2
keyopt,76,2,2						! Y Degree of Freedom
et,77,combin14,,2
keyopt,77,2,2						! Y Degree of Freedom
et,78,combin14,,1
keyopt,78,2,1						! X Degree of Freedom
et,79,combin14,,2
keyopt,79,2,2						! Y Degree of Freedom
et,80,combin14,,2
keyopt,80,2,2						! Y Degree of Freedom
et,81,combin14,,1
keyopt,81,2,1						! X Degree of Freedom
et,82,combin14,,2
keyopt,82,2,2						! Y Degree of Freedom
et,83,combin14,,3
keyopt,83,2,3						! Z Degree of Freedom

/com,----------------------------------------------------------------------------------
/com

/com, Real Constants
/com,****************

r, 1,OD_1,WTick_1						
r, 2,OD_2,WTick_2
r, 3,OD_3,WTick_3
r, 4,OD_4,WTick_4
r, 5, OD_5,WTick_5
r, 6, OD_6,WTick_6
r, 7, OD_7,WTick_7
r, 8, OD_8,WTick_8
r, 9, OD_9,WTick_9
r, 10, OD_10,WTick_10
r, 11, OD_11,WTick_11
r, 12, OD_12,WTick_12
r, 13, OD_13,WTick_13

r, 14, OD_3, WTick_3,RADCUR_1
r, 15, OD_6, WTick_6,RADCUR_1
r, 16, OD_6, WTick_6,RADCUR_2
r, 17, OD_13, WTick_13,RADCUR_1
r, 18, OD_13, WTick_13,RADCUR_2
r, 19, OD_8, WTick_8,RADCUR_3
r, 20, OD_12, WTick_12,RADCUR_4
r, 21, OD_12, WTick_12,RADCUR_5
r, 22, OD_12, WTick_12,RADCUR_6

r,23,1.69306
r,24,5.07505
r,25,4.96894
r,26,1.20212
r,27,1.42495
r,28,1.88768
r,29,2.18323
r,30,2.4397
r,31,2.98188
r,32,1.41874
r,33,1.04943e+1
r,34,9.30124e-1
r,35,1.6118
r,36,6.74431e-1
r,37,6.43116e-1
r,38,1.06962
r,39,1.20549
r,40,1.05642
r,41,1.25388
r,42,1.3543
r,43,6.66149e-1
r,44,2.27769
r,45,1.15217
r,46,1.23214
r,47,1.52976

r,48, 0.1e+9
r,49, 0.1e+9
r,50, 0.1e+9
r,51, 0.1080e+4
r,52, 0.6001e+5
r,53, 0.6001e+5
r,54, 0.6001e+5
r,55, 0.7541e+6
r,56, 0.7541e+6
r,57, 0.6001e+5
r,58, 0.6000e+3
r,59, 0.6001e+5
r,60, 0.7601e+5
r,61, 0.6001e+5
r,62, 0.8000e+3
r,63, 0.6001e+5
r,64, 0.1000e+9
r,65, 0.1000e+9
r,66, 0.1000e+9
r,67, 0.2600e+3
r,68, 0.5901e+5
r,69, 0.2400e+5
r,70, 0.7601e+5
r,71, 0.2801e+5
r,72, 0.2460e+6
r,73, 0.6001e+5
r,74, 0.6001e+5
r,75, 0.7501e+5
r,76, 0.4660e+6
r,77, 0.3400e+3
r,78, 0.6001e+5
r,79, 0.5000e+6
r,80, 0.5000e+6
r,81, 0.1000e+9
r,82, 0.1000e+9
r,83, 0.1000e+9 

/com,------------------------------------------------------------------------------------

/com, Material Properties
/com,*********************

MP,EX,  1, YoungModulus					
MP,NUXY,1, Nu
MP,GXY ,1, ShearModulus
MP,ALPX,1, K

MP,EX,  2, YoungModulus					
MP,NUXY,2, Nu
MP,GXY ,2, ShearModulus
MP,ALPX,2, K

MP,EX,  3, YoungModulus
MP,NUXY,3, Nu
MP,GXY ,3, ShearModulus
MP,ALPX,3, K

MP,EX,  4, YoungModulus
MP,NUXY,4, Nu
MP,GXY ,4, ShearModulus
MP,ALPX,4, K

MP,EX,  5, YoungModulus
MP,NUXY,5, Nu
MP,GXY ,5, ShearModulus
MP,ALPX,5, K

MP,EX,  6, YoungModulus
MP,NUXY,6, Nu
MP,GXY ,6, ShearModulus
MP,ALPX,6, K

MP,EX,  7, YoungModulus
MP,NUXY,7, Nu
MP,GXY ,7, ShearModulus
MP,ALPX,7, K

MP,EX,  8, YoungModulus
MP,NUXY,8, Nu
MP,GXY ,8, ShearModulus
MP,ALPX,8, K

MP,EX,  9, YoungModulus
MP,NUXY,9, Nu
MP,GXY ,9, ShearModulus
MP,ALPX,9, K

MP,EX,  10, YoungModulus
MP,NUXY,10, Nu
MP,GXY ,10, ShearModulus
MP,ALPX,10, K

MP,EX,  11, YoungModulus
MP,NUXY,11, Nu
MP,GXY ,11, ShearModulus
MP,ALPX,11, K

MP,EX,  12, YoungModulus
MP,NUXY,12, Nu
MP,GXY ,12, ShearModulus
MP,ALPX,12, K

MP,EX,  13, YoungModulus
MP,NUXY,13, Nu
MP,GXY ,13, ShearModulus
MP,ALPX,13, K

MP,EX,  14, YoungModulus
MP,NUXY,14, Nu
MP,GXY ,14, ShearModulus
MP,ALPX,14, K

MP,EX,  15, YoungModulus
MP,NUXY,15, Nu
MP,GXY ,15, ShearModulus
MP,ALPX,15, K

MP,EX,  16, YoungModulus
MP,NUXY,16, Nu
MP,GXY ,16, ShearModulus
MP,ALPX,16, K

MP,EX,  17, YoungModulus
MP,NUXY,17, Nu
MP,GXY ,17, ShearModulus
MP,ALPX,17, K

MP,EX,  18, YoungModulus
MP,NUXY,18, Nu
MP,GXY ,18, ShearModulus
MP,ALPX,18, K

MP,EX,  19, YoungModulus
MP,NUXY,19, Nu
MP,GXY ,19, ShearModulus
MP,ALPX,19, K

MP,EX,  20, YoungModulus
MP,NUXY,20, Nu
MP,GXY ,20, ShearModulus
MP,ALPX,20, K

MP,EX,  21, YoungModulus
MP,NUXY,21, Nu
MP,GXY ,21, ShearModulus
MP,ALPX,21, K

MP,EX,  22, YoungModulus
MP,NUXY,22, Nu
MP,GXY ,22, ShearModulus
MP,ALPX,22, K

/com,------------------------------------------------------------------------------------

/com, Nodes
/com,*******

n,1,-203.808,4715.952,139.224
n,2,-215.808,4715.952,139.224
n,3,-203.808,4703.952,139.224
n,4,-203.808,4715.952,127.224
n,5,-203.268,4719.852,154.860
n,6,-202.308,4726.800,182.748
n,7,-202.008,4728.948,191.340
n,8,-201.876,4729.392,194.916
n,9,-201.888,4729.392,194.988
n,10,-205.908,4729.392,205.740
n,11,-210.036,4729.392,210.168
n,12,-212.160,4729.392,212.436
n,13,-213.324,4729.392,213.684
n,14,-220.968,4729.392,221.868
n,15,-220.968,4734.492,221.868
n,16,-231.888,4729.392,233.568
n,17,-233.952,4729.392,235.776
n,18,-233.952,4741.392,235.776
n,19,-235.980,4729.392,237.936
n,20,-246.204,4714.392,248.904

n,21,-246.204,4705.860,248.904
n,22,-246.204,4686.792,248.904
n,23,-246.204,4676.952,248.904
n,24,-246.204,4665.900,248.904
n,25,-246.204,4638.876,248.904
n,26,-246.204,4631.628,248.904
n,27,-246.204,4628.952,248.904
n,28,-256.812,4613.952,238.296
n,29,-263.004,4613.952,232.104
n,30,-263.004,4625.952,232.104
n,31,-264.048,4613.952,231.060
n,32,-275.352,4613.952,219.744
n,33,-275.352,4619.052,219.744
n,34,-286.668,4613.952,208.440
n,35,-291.996,4613.952,203.112
n,36,-302.604,4613.952,198.720
n,37,-314.988,4613.952,198.720
n,38,-314.988,4613.952,186.720
n,39,-340.380,4613.952,198.720
n,40,-366.000,4613.952,198.720

n,41,-381.000,4628.952,198.720
n,42,-381.000,4630.560,198.720
n,43,-381.000,4655.952,198.720
n,44,-369.035,4655.952,197.800
n,45,-381.000,4689.588,198.720
n,46,-381.000,4756.872,198.720
n,47,-381.000,4760.952,198.720
n,48,-396.000,4775.952,198.720
n,49,-399.000,4775.952,198.720
n,50,-399.000,4787.952,198.720
n,51,-402.600,4775.952,198.720
n,52,-402.600,4775.872,210.685
n,53,-440.904,4775.952,198.720
n,54,-450.612,4775.952,198.720
n,55,-465.612,4790.952,198.720
n,56,-465.612,4796.592,198.720
n,57,-453.643,4796.592,197.860
n,58,-465.612,4840.068,198.720
n,59,-465.612,4927.032,198.720
n,60,-465.612,4943.952,198.720

n,61,-459.864,4958.952,212.568
n,62,-458.712,4958.952,215.340
n,63,-458.712,4970.952,215.340
n,64,-455.748,4958.952,222.480
n,65,-463.860,4958.952,242.076
n,66,-484.044,4958.952,250.452
n,67,-533.124,4958.952,270.828
n,68,-537.724,4958.952,259.745
n,69,-552.516,4958.952,278.880
n,70,-552.600,4958.952,278.916
n,71,-560.652,4958.952,298.392
n,72,-559.464,4958.952,301.248
n,73,-559.464,4970.952,301.248
n,74,-558.312,4958.952,304.020
n,75,-553.866,4961.957,293.286
n,76,-554.868,4958.952,312.324
n,77,-548.736,4958.952,327.108
n,78,-548.736,4981.752,327.108
n,79,-546.708,4958.952,331.992
n,80,-542.604,4958.952,341.880

n,81,-538.152,4958.952,352.620
n,82,-532.404,4973.952,366.468
n,83,-532.404,4988.628,366.468
n,84,-532.404,5039.952,366.468
n,85,-532.404,5040.048,366.468
n,86,-546.168,5054.952,372.180
n,87,-551.904,5054.952,374.568
n,88,-551.904,5066.952,374.568
n,89,-560.988,5054.952,378.336
n,90,-560.988,5066.952,378.336
n,91,-565.128,5054.952,380.052
n,92,-578.988,5069.952,385.812
n,93,-578.988,5091.924,385.812
n,94,-578.988,5141.940,385.812
n,95,-590.988,5141.940,385.812
n,96,-578.988,5129.940,385.812
n,97,-578.988,5141.940,373.812
n,98,-242.400,4676.952,252.708
n,99,-242.382,4676.952,252.720
n,100,-238.434,4676.952,256.680

n,101,-232.056,4667.952,263.052
n,102,-232.056,4665.936,263.052
n,103,-232.056,4622.952,263.052
n,104,-225.696,4613.952,256.692
n,105,-218.688,4613.952,249.684
n,106,-216.048,4613.952,243.312
n,107,-216.048,4613.952,208.800
n,108,-216.048,4613.952,181.644
n,109,-216.048,4625.952,181.644
n,110,-216.048,4613.952,155.748
n,111,-216.048,4613.952,103.944
n,112,-216.048,4613.952,78.048
n,113,-204.048,4613.952,78.048
n,114,-216.048,4613.952,34.980
n,115,-216.048,4613.952,27.048
n,116,-225.048,4613.952,18.048
n,117,-231.048,4613.952,18.048
n,118,-231.048,4616.447,29.785
n,119,-246.048,4613.952,18.048
n,120,-246.048,4625.952,18.048

n,121,-267.048,4613.952,18.048
n,122,-276.048,4613.952,27.048
n,123,-276.048,4613.952,40.452
n,124,-276.048,4613.952,137.544
n,125,-276.048,4613.952,168.948
n,126,-276.048,4622.952,177.948
n,127,-276.048,4625.952,177.948
n,128,-274.814,4625.952,189.884
n,129,-276.048,4668.492,177.948
n,130,-276.048,4753.560,177.948
n,131,-276.048,4766.952,177.948
n,132,-285.048,4775.952,177.948
n,133,-288.048,4775.952,177.948
n,134,-288.048,4787.952,177.948
n,135,-300.048,4775.952,177.948
n,136,-300.048,4781.441,188.620
n,137,-350.532,4775.952,177.948
n,138,-451.512,4775.952,177.948
n,139,-472.020,4775.952,177.948
n,140,-481.020,4784.952,177.948

n,141,-481.020,4800.792,177.948
n,142,-469.580,4800.792,181.571
n,143,-481.020,4855.320,177.948
n,144,-481.020,4964.388,177.948
n,145,-481.020,4979.592,177.948
n,146,-481.020,4979.592,189.948
n,147,-481.020,5000.592,177.948
n,148,-489.336,5009.952,181.392
n,149,-492.876,5009.952,182.868
n,150,-492.876,5021.952,182.868
n,151,-520.044,5009.952,194.148
n,152,-558.600,5009.952,210.156
n,153,-566.916,5018.952,213.600
n,154,-566.916,5021.892,213.600
n,155,-566.916,5048.952,213.600
n,156,-563.472,5057.952,221.912
n,157,-562.320,5057.952,224.688
n,158,-562.320,5069.952,224.688
n,159,-558.864,5057.952,233.004
n,160,-556.716,5057.952,238.188

n,161,-553.884,5057.952,245.004
n,162,-553.884,5062.044,245.004
n,163,-548.904,5057.952,257.016
n,164,-546.600,5057.952,262.560
n,165,-545.436,5057.952,265.368
n,166,-556.148,5060.878,260.821
n,167,-534.588,5057.952,291.528
n,168,-512.880,5057.952,343.824
n,169,-502.020,5057.952,369.984
n,170,-502.020,5069.952,369.984
n,171,-500.988,5057.952,372.468
n,172,-496.392,5045.952,383.544
n,173,-496.392,5037.192,383.544
n,174,-496.392,5033.952,383.544
n,175,-506.700,5021.952,389.676
n,176,-539.784,5021.952,409.358
n,177,-596.976,5059.452,495.504
n,178,-588.540,5021.952,438.372
n,179,-588.624,5021.952,438.420
n,180,-595.416,5029.848,442.464

n,181,-595.416,5035.452,442.464
n,182,-605.748,5047.452,448.596
n,183,-610.896,5047.452,451.668
n,184,-615.072,5047.452,468.120
n,185,-613.716,5047.452,470.388
n,186,-603.960,5047.452,486.792
n,187,-597.504,5047.452,494.988
n,188,-596.976,5047.452,495.504
n,189,-570.048,5047.452,521.736
n,190,-516.180,5047.452,574.200
n,191,-462.312,5047.452,626.676
n,192,-435.384,5047.452,652.920
n,193,-447.384,5047.452,652.920
n,194,-435.384,5035.452,652.920
n,195,-435.384,5047.452,640.920

n,271,-249.31,4618.4,245.79
n,272,-560.66,4959,286.99
n,273,-574.94,5059.4,384.11
n,274,-536.41,5050.6,368.12
n,275,-233.93,4674.4,261.18
n,276,-483.33,5007.2,178.89
n,277,-564.48,5012.6,212.59
n,278,-598.45,5044.0,444.25
n,279,-616.39,5047.5,459.03

/com,------------------------------------------------------------------------------------

/com,
/com, Straight Pipe (Tangent) Elements
/com,**********************************

mat,1
type,1
real,1
e,1,5

type,2
real,2
e,5,6

type,3
real,3
e,6,7
e,8,9
e,10,11

type,4
real,4
e,11,12
e,12,13
e,13,14
e,14,16
e,31,32
e,32,34

type,5
real,5
e,14,15 
e,32,33
e,77,78

type,6
real,6
e,16,17
e,17,19
e,20,21
e,21,22
e,22,23
e,23,24
e,24,25
e,25,26
e,26,27
e,28,29
e,29,31
e,34,35
e,36,37
e,37,39
e,39,40
e,41,42
e,42,43
e,43,45
e,45,46
e,46,47
e,48,49
e,49,51
e,51,53
e,53,54
e,55,56
e,56,58
e,58,59
e,59,60
e,61,62
e,62,64
e,65,66
e,66,67
e,67,69
e,69,70
e,71,72
e,72,74
e,74,76

type,7
real,7
e,76,77
e,77,79
e,79,80

type,13
real,13
e,80,81
e,82,83
e,83,84
e,84,85
e,86,87
e,87,89
e,89,91
e,92,93
e,93,94

id = 8
type,8
real,8
e,23,98
e,98,99
e,99,100
e,101,102
e,102,103
e,104,105
e,106,107
e,107,108
e,108,110
e,110,111
e,111,112
e,112,114
e,114,115
e,116,117
e,117,119
e,119,121
e,122,123
e,123,124
e,124,125
e,126,127
e,127,129
e,129,130
e,130,131
e,132,133
e,133,135
e,135,137
e,137,138
e,138,139
e,140,141
e,141,143
e,143,144
e,144,145
e,145,147
e,148,149
e,149,151
e,151,152
e,153,154
e,154,155
e,156,157
e,157,159
e,163,164

type,9
real,9
e,159,160
e,160,161
e,161,163

type,10
real,10
e,161,162

type,12
real,12
e,164,165
e,165,167
e,167,168
e,168,169
e,169,171
e,172,173
e,173,174
e,175,176
e,176,178
e,178,179
e,180,181
e,182,183
e,184,185
e,185,186
e,187,188
e,188,189
e,189,190
e,190,191
e,191,192

/com,
/com, Pipe Bend Elements
/com,********************

mat,1

type,14
real,14
e,7,8,6
e,9,10,11

type,15
real,15
e,19,20,21
e,27,271,26
e,271,28,29
e,35,36,37
e,40,41,42
e,47,48,49
e,54,55,53
e,60,61,62
e,64,65,66

type,16
real,16
e,70,272,69
e,272,71,72

type,17
real,17
e,81,82,83
e,91,273,89
e,273,92,93

type,18
real,18
e,85,274,83
e,274,86,87

type,19
real,19
e,100,275,99
e,275,101,102
e,103,104,105
e,105,106,107
e,115,116,114
e,121,122,123
e,125,126,124
e,131,132,133
e,139,140,138
e,147,276,145
e,276,148,149
e,152,277,151
e,277,153,154
e,155,156,157

type,20
real,20
e,171,172,173
e,174,175,176
e,181,278,180
e,278,182,183
e,183,279,182
e,279,184,185

type,21
real,21
e,186,187,188

type,22
real,22
e,179,180,181

/com, Point Mass without considering rotatary inertia
/com,*************************************************

type,23
real,23
e,12
e,21
e,25

type,24
real,24
e,15

type,25
real,25
e,33

type,26
real,26
e,34

type,27
real,27
e,39
e,42

type,28
real,28
e,45
e,46

type,29
real,29
e,53

type,30
real,30
e,58
e,59

type,31
real,31
e,66

type,32
real,32
e,69

type,33
real,33
e,78

type,34
real,34
e,79
e,83
e,84

type,35
real,35
e,93

type,36
real,36
e,102
e,104
e,107

type,37
real,37
e,110
e,111

type,38
real,38
e,114

type,39
real,39
e,123
e,124

type,40
real,40
e,129
e,130

type,41
real,41
e,137
e,138

type,42
real,42
e,143
e,144

type,43
real,43
e,151
e,154
e,160

type,44
real,44
e,162

type,45
real,45
e,167
e,168

type,46
real,46
e,173
e,176
e,178
e,185

type,47
real,47
e,189
e,190
e,191

/com,
/com, Elastic supports and anchors
/com,******************************

type,48
real,48
e,1,2

type,49
real,49
e,1,3

type,50
real,50
e,1,4

id = 51
type,51
real,51
e,17,18

type,52
real,52
e,29,30

type,53
real,53
e,37,38

type,55
real,55
e,49,50

type,58
real,58
e,62,63

type,60
real,60
e,72,73

type,62
real,62
e,87,88

type,63
real,63
e,89,90

type,64
real,64
e,94,95

type,65
real,65
e,94,96

type,66
real,66
e,94,97

type,67
real,67
e,108,109

type,68
real,68
e,112,113

type,70
real,70
e,119,120

type,72
real,72
e,133,134

type,75
real,75
e,145,146

type,76
real,76
e,149,150

type,77
real,77
e,157,158

id = 79
type,79
real,79
e,169,170

type,80
real,80
e,188,177

type,81
real,81
e,192,193

type,82
real,82
e,192,194

type,83
real,83
e,192,195

/com,
/com, rotate nodes with less than 3 supports
/com,****************************************

wplane,,nx(43),ny(43),nz(43),nx(44),ny(44),nz(44),nx(45),ny(45),nz(45)
cswplane,11,0
nrotat,43
nrotat,44
csys,0

real,54  
type,54  
e,43,44

wplane,,nx(51),ny(51),nz(51),nx(52),ny(52),nz(52),nx(49),ny(49),nz(49)
cswplane,12,0
nrotat,51
nrotat,52
csys,0

real,56  
type,56  
e,51,52

wplane,,nx(56),ny(56),nz(56),nx(57),ny(57),nz(57),nx(55),ny(55),nz(55)
cswplane,13,0
nrotat,56
nrotat,57
csys,0

real,57  
type,57  
e,56,57

wplane,,nx(67),ny(67),nz(67),nx(68),ny(68),nz(68),nx(66),ny(66),nz(66)
cswplane,14,0
nrotat,67
nrotat,68
csys,0

real,59 
type,59  
e,67,68

wplane,,nx(74),ny(74),nz(74),nx(75),ny(75),nz(75),nx(72),ny(72),nz(72)
cswplane,15,0
nrotat,74
nrotat,75
csys,0

real,61  
type,61  
e,74,75

wplane,,nx(117),ny(117),nz(117),nx(118),ny(118),nz(118),nx(116),ny(116),nz(116)
cswplane,16,0
nrotat,117
nrotat,118
csys,0

real,69  
type,69  
e,117,118

wplane,,nx(127),ny(127),nz(127),nx(128),ny(128),nz(128),nx(126),ny(126),nz(126)
cswplane,17,0
nrotat,127
nrotat,128
csys,0

real,71  
type,71  
e,127,128

wplane,,nx(135),ny(135),nz(135),nx(136),ny(136),nz(136),nx(133),ny(133),nz(133)
cswplane,18,0
nrotat,135
nrotat,136
csys,0

real,73  
type,73  
e,135,136

wplane,,nx(141),ny(141),nz(141),nx(142),ny(142),nz(142),nx(140),ny(140),nz(140)
cswplane,19,0
nrotat,141
nrotat,142
csys,0

real,74  
type,74  
e,141,142

wplane,,nx(165),ny(165),nz(165),nx(166),ny(166),nz(166),nx(164),ny(164),nz(164)
cswplane,20,0
nrotat,165
nrotat,166
csys,0

real,78  
type,78  
e,165,166

/com,------------------------------------------------------------------------------------

/com,
/com, Constraints
/com,*************

nsel,s,node,,2,4
nsel,a,node,,18
nsel,a,node,,30
nsel,a,node,,38
nsel,a,node,,44
nsel,a,node,,50
nsel,a,node,,52
nsel,a,node,,57
nsel,a,node,,63
nsel,a,node,,68
nsel,a,node,,73
nsel,a,node,,75
nsel,a,node,,88
nsel,a,node,,90
nsel,a,node,,95,97
nsel,a,node,,109
nsel,a,node,,113
nsel,a,node,,118
nsel,a,node,,120
nsel,a,node,,128
nsel,a,node,,134
nsel,a,node,,136
nsel,a,node,,142
nsel,a,node,,146
nsel,a,node,,150
nsel,a,node,,158
nsel,a,node,,166
nsel,a,node,,170
nsel,a,node,,177
nsel,a,node,,193,195
d,all,all
allsel,all,all

d,1,rotx,,,,,roty,rotz
d,94,rotx,,,,,roty,rotz
d,192,rotx,,,,,roty,rotz

finish

/com,------------------------------------------------------------------------------------

/com,
/com,=============
/com,	Modal Solve
/com,=============
/com,

/solution
antype,modal					! Perform Modal Analysis
modopt,lanb,maxm					
lumpm,on						! Use Lumped Mass Matrix Approximation
mxpand,maxm,,,yes					! Expand solutions with Element Calculations turned ON
solve
save

/com,
/com,===========================
/com, Compare Modal Frequencies
/com,===========================
/com,

*dim,Amode,ARRAY,maxm
*dim,Emode,ARRAY,maxm
*dim,ERmode,ARRAY,maxm
*dim,moden,ARRAY,maxm

*do,i,1,maxm
	*GET, Amode(i), MODE, i, FREQ
*enddo
*VFILL,Emode,DATA,2.612,2.914,4.337,4.66,5.734,5.833,7.359,7.769,9.952,10.329
*VFILL,Emode(11),DATA,10.679,10.943,12.03,12.286,13.251,13.407,14.429,14.72,15.253,15.553
*VFILL,Emode(21),DATA,16.172,16.797,17.23,17.275,17.453,18.71,18.898,19.993,21.46,21.523
*VFILL,Emode(31),DATA,22.736,23.281,24.067,24.593,25.117,26.516,26.935,27.509,28.662,29.542
*VFILL,Emode(41),DATA,30.596,31.274,32.283,35.484,36.022,36.394,36.769,38.0,38.42,40.185

*do,i,1,maxm
		ERmode(i) = ABS(Amode(i)/Emode(i))
		moden(i) = i
*enddo

save,table_1
finish

/com,------------------------------------------------------------------------------------

/com,
/com,================
/com,	Spectrum Solve
/com,================
/com,

/solution
antype,spectr						! Perform Spectrum Analysis
spopt,sprs,maxm						! Single Point Response Spectrum
SRSS,0.0							! Combine modes using SRSS mode combination

/com,------------------------------------------------------------------------------------
/com,

/com,
/com, spectrum 1 (X - Direction)
/com,****************************

svtyp, 2, 386.20

freq,0.2,0.5,0.5263,0.578,0.7752,1.7241,2.0,2.1978,2.2472,                                  
SV,,0.16,0.16,0.16,0.23,0.339,0.55,0.555,0.555,0.65,

freq,2.9851,3.125,4.1667,5.0,5.7143,7.6923,9.0909,9.5238,10.4167
sv,,0.65,1.5,1.5,1.36,0.45,0.935,0.935,0.995,1.31,

freq,14.0845,17.8571,19.6078,27.027,33.3333,50.0,100.0
sv,,1.31,1.0,1.222,1.222,0.5,0.252,0.252,

sed,1,0,0
solve

/com,
/com, spectrum 2 (Y - Direction) 
/com,****************************

svtyp, 2, 386.20
freq,,

FREQ,0.2,0.6061,0.667,1.9231,2.439,3.7037,4.0,5.3476,5.5866,
SV,,0.085,0.115,0.125,0.36,0.40,0.525,0.54,0.54,0.506,

FREQ,8.333,10.989,12.5,14.7059,20.0,21.2766,22.2222,27.7778,28.5714,   
SV,,2.6,2.6,0.9,0.875,0.875,0.76,0.85,0.85,0.522,

FREQ,30.303,33.3333,50.0,100.0
SV,,0.255,0.295,0.194,0.194

sed,0,1,0
solve

/com,
/com, spectrum 3 (Z - Direction) 
/com,***************************

svtyp, 2, 386.20
freq,,,

FREQ,0.2,0.5,0.5814,1.7544,2.1739,2.8571,3.0303,4.1667,5.0,    
SV,,0.16,0.16,0.23,0.56,0.56,0.80,1.5,1.5,1.15,

FREQ,5.2632,5.7143,5.8824,6.2893,6.5789,7.4074,9.6154,10.4167,14.0845,            
SV,,0.64,0.64,0.7,0.7,0.875,1.05,1.05,1.31,1.31,

FREQ,15.873,17.2414,25.0,27.027,32.2581,50.0,100.0
SV,,0.85,1.15,1.15,1.1,0.5,0.225,0.225,

sed,0,0,1
solve

finish

/com,------------------------------------------------------------------------------------
/com,

/post1
/input,,mcom

/com,-----------------------------------

/com, *Labels*
*dim,label2,char,1,6
*dim,label3,char,6,1
*dim,label4,char,6,1
*dim,label5,char,22,1

/com,-------------------------

label2(1,1) = 'ux_81'
label2(1,2) = 'uy_155'
label2(1,3) = 'uz_61'
label2(1,4) ='rotx_143'
label2(1,5) ='roty_149'
label2(1,6) ='rotz_84'

/com,-----------------------

label3(1,1)='PX(I)'
label3(2,1)='VY(I)'
label3(3,1)='VZ(I)'
label3(4,1)='TX(I)'
label3(5,1)='MY(I)'
label3(6,1)='MZ(I)'

/com,-----------------------

label4(1,1)='PX(J)'
label4(2,1)='VY(J)'
label4(3,1)='VZ(J)'
label4(4,1)='TX(J)'
label4(5,1)='MY(J)'
label4(6,1)='MZ(J)'

/com,-----------------------------------

/com,------------------------------------------------------------------------------------

/com,
/com,========================================================
/com, Maximum nodal displacements and rotations comparsion
/com,========================================================
/com,

/com, Solution obtained from Mechanical APDL
/com, ****************************

*GET,AdisX,NODE,81,U,X
*GET,AdisY,NODE,155,U,Y
*GET,AdisZ,NODE,61,U,Z
*GET,ArotX,NODE,143,ROT,X
*GET,ArotY,NODE,149,ROT,Y
*GET,ArotZ,NODE,84,ROT,Z

/com,
/com, Expected results from NRC manual
/com, *********************************

*SET,EdisX,9.29050e-01
*SET,EdisY,3.19026e-01
*SET,EdisZ,6.18342e-01
*SET,ErotX,5.98220e-03
*SET,ErotY,1.00078e-02
*SET,ErotZ,9.17224e-03

/com,
/com, Error computation
/com,********************

ERdisX=ABS(AdisX/EdisX)
ERdisY=ABS(AdisY/EdisY)
ERdisZ=ABS(AdisZ/EdisZ)
ERrotX=ABS((ArotX)/(ErotX))
ERrotY=ABS((ArotY)/(ErotY))
ERrotZ=ABS((ArotZ)/(ErotZ))

*dim,value,,6,3

*vfill,value(1,1),data,EdisX
*vfill,value(1,2),data,AdisX
*vfill,value(1,3),data,ERdisX

*vfill,value(2,1),data,EdisY
*vfill,value(2,2),data,AdisY
*vfill,value(2,3),data,ERdisY

*vfill,value(3,1),data,EdisZ
*vfill,value(3,2),data,AdisZ
*vfill,value(3,3),data,ERdisZ

*vfill,value(4,1),data,ErotX
*vfill,value(4,2),data,ArotX
*vfill,value(4,3),data,ERrotX

*vfill,value(5,1),data,ErotY
*vfill,value(5,2),data,ArotY
*vfill,value(5,3),data,ERrotY

*vfill,value(6,1),data,ErotZ
*vfill,value(6,2),data,ArotZ
*vfill,value(6,3),data,ERrotZ

save,table_2

/com,------------------------------------------------------------------------------------

/com,========================================================
/com, Element Forces and Moments Comparison
/com,========================================================

/com, Solution obtained from Mechanical APDL
/com,******************************

*dim,elem_res_I,,1,6
*dim,elem_res_J,,1,6

*dim,pxi,,1
*dim,vyi,,1
*dim,vzi,,1
*dim,txi,,1
*dim,myi,,1
*dim,mzi,,1

*dim,pxj,,1
*dim,vyj,,1
*dim,vzj,,1
*dim,txj,,1
*dim,myj,,1
*dim,mzj,,1

esel,s,ename,,16
esel,a,ename,,18

/com,==========
/com,	 Node I
/com,==========

/com, Element #1
/com,***********

*get,pxi(1,1),elem,1,smisc,1
*get,vyi(1,1),elem,1,smisc,2
*get,vzi(1,1),elem,1,smisc,3
*get,txi(1,1),elem,1,smisc,4
*get,myi(1,1),elem,1,smisc,5
*get,mzi(1,1),elem,1,smisc,6

*vfill,elem_res_I(1,1),data,pxi(1,1)
*vfill,elem_res_I(1,2),data,vyi(1,1)
*vfill,elem_res_I(1,3),data,vzi(1,1)
*vfill,elem_res_I(1,4),data,txi(1,1)
*vfill,elem_res_I(1,5),data,myi(1,1)
*vfill,elem_res_I(1,6),data,mzi(1,1)

/com,==========
/com,  Node J
/com,==========

/com, Element #1
/com,************

*get,pxj(1,1),elem,1,smisc,7
*get,vyj(1,1),elem,1,smisc,8
*get,vzj(1,1),elem,1,smisc,9
*get,txj(1,1),elem,1,smisc,10
*get,myj(1,1),elem,1,smisc,11
*get,mzj(1,1),elem,1,smisc,12

*vfill,elem_res_J(1,1),data,pxj(1,1)
*vfill,elem_res_J(1,2),data,vyj(1,1)
*vfill,elem_res_J(1,3),data,vzj(1,1)
*vfill,elem_res_J(1,4),data,txj(1,1)
*vfill,elem_res_J(1,5),data,myj(1,1)
*vfill,elem_res_J(1,6),data,mzj(1,1)

/com,----------------------------------------------------------------------------

/com, Results from NRC benchmarks
/com, ***************************

*dim,exp_I,,1,6
*dim,exp_J,,1,6

/com, Element #1
/com,************

*vfill,exp_I(1,1),data,2.273e+03
*vfill,exp_I(1,2),data,3.719e+03
*vfill,exp_I(1,3),data,2.287e+03
*vfill,exp_I(1,4),data,1.050e+05
*vfill,exp_I(1,5),data,2.299e+05
*vfill,exp_I(1,6),data,3.516e+05

*vfill,exp_J(1,1),data,2.273e+03
*vfill,exp_J(1,2),data,3.719e+03
*vfill,exp_J(1,3),data,2.287e+03
*vfill,exp_J(1,4),data,1.050e+05
*vfill,exp_J(1,5),data,1.987e+05
*vfill,exp_J(1,6),data,2.920e+05

/com,---------------------------------------------------------------------------

/com, Error computation
/com, *********************

*dim,elem_error_I,,1,6
*dim,elem_error_J,,1,6
*dim,elem_tab,,12,3

/com,============
/com,   Node I
/com,============

i = 1
	*do,j,1,6
		*vfill,elem_error_I(i,j),data,abs(elem_res_I(i,j)/exp_I(i,j))
	*enddo

/com,============
/com,   Node J
/com,============

i = 1
	*do,j,1,6
		*vfill,elem_error_J(i,j),data,abs(elem_res_J(i,j)/exp_J(i,j))
	*enddo

/com,--------------------------------------------------------------------------

i = 1
	cs=(i-1)*6
	*do,j,1,6
		n=cs+j
		*vfill,elem_tab(n,1),data,exp_I(i,j)
		*vfill,elem_tab(n,2),data,elem_res_I(i,j)
		*vfill,elem_tab(n,3),data,elem_error_I(i,j)
	*enddo

	*do,j,1,6
		m=cs+j+6
		*vfill,elem_tab(m,1),data,exp_J(i,j)
		*vfill,elem_tab(m,2),data,elem_res_J(i,j)
		*vfill,elem_tab(m,3),data,elem_error_J(i,j)
	*enddo

save,table_3

/com,------------------------------------------------------------------------------------

/com,*****************************
/com, Reaction forces comparision
/com,******************************

*dim,Areac,,36
*dim,Ereac,,36
*dim,ERreac,,36
*dim,Nreac,STRING,8,36

/com, Labels
/com,********

Nreac(1,1) = 'FX1'
Nreac(1,2) = 'FY1'
Nreac(1,3) = 'FZ1'
Nreac(1,4) = 'FY17'
Nreac(1,5) = 'FY29'

Nreac(1,6) = 'FZ37'
Nreac(1,7) = 'FX43'
Nreac(1,8) = 'FY49'
Nreac(1,9) = 'FZ51'
Nreac(1,10) = 'FX56'

Nreac(1,11) = 'FY62'
Nreac(1,12) = 'FZ67'
Nreac(1,13) = 'FY72'
Nreac(1,14) = 'FZ74'
Nreac(1,15) = 'FY87'

Nreac(1,16) = 'FY89'
Nreac(1,17) = 'FX94'
Nreac(1,18) = 'FY94'
Nreac(1,19) = 'FZ94'
Nreac(1,20) = 'FY108'

Nreac(1,21) = 'FX112'
Nreac(1,22) = 'FZ117'
Nreac(1,23) = 'FY119'
Nreac(1,24) = 'FZ127'
Nreac(1,25) = 'FY133'

Nreac(1,26) = 'FZ135'
Nreac(1,27) = 'FX141'
Nreac(1,28) = 'FZ145'
Nreac(1,29) = 'FY149'
Nreac(1,30) = 'FY157'

Nreac(1,31) = 'FX165'
Nreac(1,32) = 'FY169'
Nreac(1,33) = 'FY188'
Nreac(1,34) = 'FX192'
Nreac(1,35) = 'FY192'
Nreac(1,36) = 'FZ192'

/com, Solution obtained from Mechanical APDL
/com,******************************

*GET,Areac(1),NODE,2,RF,FX
*GET,Areac(2),NODE,3,RF,FY
*GET,Areac(3),NODE,4,RF,FZ
*GET,Areac(4),NODE,18,RF,FY
*GET,Areac(5),NODE,30,RF,FY

*GET,Areac(6),NODE,38,RF,FZ
*GET,Areac(7),NODE,44,RF,FX
*GET,Areac(8),NODE,50,RF,FY
*GET,Areac(9),NODE,52,RF,FX
*GET,Areac(10),NODE,57,RF,FX

*GET,Areac(11),NODE,63,RF,FY
*GET,Areac(12),NODE,68,RF,FX
*GET,Areac(13),NODE,73,RF,FY
*GET,Areac(14),NODE,75,RF,FX
*GET,Areac(15),NODE,88,RF,FY

*GET,Areac(16),NODE,90,RF,FY
*GET,Areac(17),NODE,95,RF,FX
*GET,Areac(18),NODE,96,RF,FY
*GET,Areac(19),NODE,97,RF,FZ
*GET,Areac(20),NODE,109,RF,FY

*GET,Areac(21),NODE,113,RF,FX
*GET,Areac(22),NODE,118,RF,FX
*GET,Areac(23),NODE,120,RF,FY
*GET,Areac(24),NODE,128,RF,FX
*GET,Areac(25),NODE,134,RF,FY

*GET,Areac(26),NODE,136,RF,FX
*GET,Areac(27),NODE,142,RF,FX
*GET,Areac(28),NODE,146,RF,FZ
*GET,Areac(29),NODE,150,RF,FY
*GET,Areac(30),NODE,158,RF,FY

*GET,Areac(31),NODE,166,RF,FX
*GET,Areac(32),NODE,170,RF,FY
*GET,Areac(33),NODE,177,RF,FY
*GET,Areac(34),NODE,193,RF,FX
*GET,Areac(35),NODE,194,RF,FY
*GET,Areac(36),NODE,195,RF,FZ

/com, Expected results from NRC manual
/com,**********************************

*VFILL,Ereac,DATA,3724,2390,2156,42,2466,4850,4765,3835,3482,2101
*VFILL,Ereac(11),DATA,61,6860,2669,6554,109,5015,3334,4739,861,64
*VFILL,Ereac(21),DATA,2312,2079,1153,1829,886,889,1858,2571,1349,106
*VFILL,Ereac(31),DATA,4370,1340,1170,970,749,2952

/com, Error computation
/com,*******************

*do,i,1,36
   ERreac(i) = abs(Areac(i)/Ereac(i))
*enddo

save,table_4

/com,------------------------------------------------------------------------------------
/com,

/out,

/com,
/com, ------------------------vm-nr1677-2-4a-a Results Verification-------------------------
/com,

/nopr
resume,table_1
/gopr

/out,vm-nr1677-2-4a-a,vrt

/com,
/com, ===========================================
/com,  COMPARISON OF MODAL FREQUENCY 
/com,      WITH EXPECTED RESULTS
/com, ===========================================
/com,

/com,	Mode | Expected | Mechanical APDL |  Ratio
/com,

*VWRITE,moden(1),Emode(1),Amode(1),ERmode(1)
(1X,F3.0,2X,F8.4,3X,F8.4,3X,F4.2,' ')

/com,
/com, -------------------------------------------------------------------------

/nopr
resume,table_2
/gopr

/com,
/com,====================================================
/com,  COMPARISON OF NODAL DISPLACEMENTS AND ROTATIONS
/com,		       WITH EXPECTED RESULTS
/com,====================================================
/com,

/com,		Result_Node | Expected | Mechanical APDL |  Ratio
/com,

*vwrite,label2(1,1),value(1,1),value(1,2),value(1,3)
(1x,a8,'  ',f10.4,'  ',f10.4,'   ',f5.3)
*vwrite,label2(1,2),value(2,1),value(2,2),value(2,3)
(1x,a8,'  ',f10.4,'  ',f10.4,'   ',f5.3)
*vwrite,label2(1,3),value(3,1),value(3,2),value(3,3)
(1x,a8,'  ',f10.4,'  ',f10.4,'   ',f5.3)
*vwrite,label2(1,4),value(4,1),value(4,2),value(4,3)
(1x,a8,'  ',f10.4,'  ',f10.4,'   ',f5.3)
*vwrite,label2(1,5),value(5,1),value(5,2),value(5,3)
(1x,a8,'  ',f10.4,'  ',f10.4,'   ',f5.3)
*vwrite,label2(1,6),value(6,1),value(6,2),value(6,3)
(1x,a8,'  ',f10.4,'  ',f10.4,'   ',f5.3)

/com,

/com,-------------------------------------------------------------------------
/com,

/nopr
resume,table_4
/gopr

/com,
/com, ===========================================
/com,  COMPARISON OF REACTION FORCES 
/com,      WITH EXPECTED RESULTS
/com, ===========================================
/com,

/com,		Node | Expected |  Mechanical APDL  |  Ratio
/com,

*VWRITE,Nreac(1),Ereac(1),Areac(1),ERreac(1)
(5X,a,2X,F12.4,3X,F12.4,3X,F8.4,' ')

/com,

/com,--------------------------------------------------------------------------
/com,

/nopr
resume,table_3
/gopr

/com,
/com,===============================================
/com,  COMPARISON OF ELEMENT FORCES AND MOMENTS
/com,		     WITH EXPECTED RESULTS
/com,===============================================
/com,

/com,--------------------------------------------------------
/com,	Note: Element Forces and Moments for some elements
/com,       along Y & Z directions are flipped between Mechanical APDL
/com,		and NRC results 
/com,--------------------------------------------------------


/com,		Result | Expected | Mechanical APDL |  Ratio
/com,

/com,===============
/com,   Element 1
/com,===============
/com,

*vwrite,label3(1,1),elem_tab(1,1),elem_tab(1,2),elem_tab(1,3)
(1x,a8,'   ',f12.4,'  ',f12.4,'   ',f5.3)

/com,

*vwrite,label4(1,1),elem_tab(7,1),elem_tab(7,2),elem_tab(7,3)
(1x,a8,'   ',f12.4,'  ',f12.4,'   ',f5.3)

/com,
/com,
/com,*******************************************************************
/com,*******************************************************************
/com,
/com,

/out,
*list,vm-nr1677-2-4a-a,vrt
finish