MSHKEY

MSHKEY, KEY
Specifies whether free meshing or mapped meshing should be used to mesh a model.

Valid Products: Pro | Premium | Enterprise | PrepPost | Solver | AS add-on

KEY

Key indicating the type of meshing to be used:

0

 — 

Use free meshing (the default).

1

 — 

Use mapped meshing.

2

 — 

Use mapped meshing if possible; otherwise, use free meshing. If you specify MSHKEY,2, SmartSizing will be inactive even while free meshing non-map-meshable areas.

Command Default

As stated above, free meshing is the default. However, since the MSHKEY and MSHAPE settings are closely related, you should refer to the table in the MSHAPE command description for more information about defaults.

Notes

This command is also valid for rezoning.

Menu Paths

Main Menu>Preprocessor>Meshing>Mesh>Areas>Mapped>3 or 4 sided
Main Menu>Preprocessor>Meshing>Mesh>Areas>Target Surf
Main Menu>Preprocessor>Meshing>Mesh>Volumes>Mapped>4 to 6 sided
Main Menu>Preprocessor>Meshing>Mesher Opts
Main Menu>Solution>Manual Rezoning>Create Remesh Zone(s)>Mesh Controls>Global Meshing Options