LSCLEAR

LSCLEAR, Lab
Clears loads and load step options from the database.

Valid Products: Pro | Premium | Enterprise | PrepPost | Solver | AS add-on

Lab

Label identifying the data to be cleared:

SOLID  

 — 

Delete only solid model loads.

FE  

 — 

Delete only finite element loads.

INER  

 — 

Delete only inertia loads (ACEL, etc.).

LFACT  

 — 

Initialize only load factors (on DCUM, FCUM, SFCUM, etc.).

LSOPT  

 — 

Initialize only load step options.

ALL  

 — 

Delete all loads and initialize all load step options and load factors.

Notes

Loads are deleted, and load step options are initialized to their default values.

This command is also valid in PREP7.

Menu Paths

Main Menu>Preprocessor>Loads>Define Loads>Delete>All Load Data>All F.E. Loads
Main Menu>Preprocessor>Loads>Define Loads>Delete>All Load Data>All Inertia Lds
Main Menu>Preprocessor>Loads>Define Loads>Delete>All Load Data>All Loads & Opts
Main Menu>Preprocessor>Loads>Define Loads>Delete>All Load Data>All SolidMod Lds
Main Menu>Preprocessor>Loads>Define Loads>Settings>Replace vs Add>Reset Factors
Main Menu>Preprocessor>Meshing>Modify Mesh>Refine At>All
Main Menu>Preprocessor>Meshing>Modify Mesh>Refine At>Areas
Main Menu>Preprocessor>Meshing>Modify Mesh>Refine At>Elements
Main Menu>Preprocessor>Meshing>Modify Mesh>Refine At>Keypoints
Main Menu>Preprocessor>Meshing>Modify Mesh>Refine At>Lines
Main Menu>Preprocessor>Meshing>Modify Mesh>Refine At>Nodes
Main Menu>Solution>Define Loads>Delete>All Load Data>All F.E. Loads
Main Menu>Solution>Define Loads>Delete>All Load Data>All Inertia Lds
Main Menu>Solution>Define Loads>Delete>All Load Data>All Loads & Opts
Main Menu>Solution>Define Loads>Delete>All Load Data>All SolidMod Lds
Main Menu>Solution>Define Loads>Settings>Replace vs Add>Reset Factors