LSBV
LSBV, NL, NV, SEPO, KEEPL, KEEPV
Subtracts volumes from lines.
NLLine (or lines, if picking is used) to be subtracted from. If ALL, use all selected lines. If
NL= P, graphical picking is enabled and all remaining command fields are ignored (valid only in the GUI). A component name may also be substituted forNL.NVVolume (or volumes, if picking is used) to be subtracted. If ALL, use all selected volumes. A component name may also be substituted for
NV.SEPOBehavior if the intersection of the
NLlines and theNVvolumes is a keypoint or keypoints:(blank)
—
The resulting lines will share keypoint(s) where they touch.
SEPO
—
The resulting lines will have separate, but coincident keypoint(s) where they touch.
KEEPLSpecifies whether
NLlines are to be deleted:KEEPVSpecifies whether
NVvolumes are to be deleted:
Notes
Generates new lines by subtracting the regions common to both NL lines
and NV volumes (the intersection) from the NL lines.
The intersection can be a line(s) or point(s). If the intersection is a
point and SEPO is blank, the NL1 line
is divided at the point and the resulting lines will be connected, sharing
a common keypoint where they touch. If SEPO is
set to SEPO, NL1 is divided into two unconnected
lines with separate keypoints where they touch. See the Modeling and Meshing Guide for an illustration.
See the BOPTN command for an explanation of the options
available to Boolean operations. Element attributes and solid model boundary
conditions assigned to the original entities will not be transferred to the
new entities generated. LSBL,ALL,ALL will have no effect
since all the lines (in NL1) will be unavailable
as NL2 lines.