Using the Stereo Immersive View Correction

Warning: This tool can only be used with an Immersive View.
Note: By default, the focal plane is at the infinite. With Stereo Immersive View Correction, you can set the stereo focus distance to optimize the visualization.

  1. Click File, Open or click Open to launch a StereoSpeos360 file.

  2. In case of the active stereoscopy, click View in 3D Stereo to activate the stereo mode.

  3. In case of the passive stereoscopy, use the Multiscreen to activate the stereo mode.

  4. Click View, Set Focal plane.

    A window appears.

  5. Move the slider to align an area.

    This sets the focal plane at this location.

Focal Plane on the acronym

Focal Plane on the rear-view mirror